China Famous Br135HP Small Motor Grader Gr135 with Cum-Mins Engine for Sale

China Famous Brand 135HP Small Motor Grader GR135 with Cum-mins Engine for Sale

Product Feature:

The GR135 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm- lands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on. 1. GR135 adopt Dong-feng cum-mins 6BT5.9-C130-II turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption. 2. Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmis- sion box has six forward gears, three backward gears, with neutral start protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions. 3. The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential. 4. The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius. 5. The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the maintainability.

PARAMETER

Item

GR135

Basic parameters

Engine model

6BT5.9-C130-2

Rated power/speed

97(2200r/min)

Overall dimension (standard)

8015X2380x3050

Total weight (standard)

11000kg

Tire specification

13.00-24

Ground clearance (front axle)

515mm

Tread

2020mm

Space of front and rear axles

5780 mm

Performance parameters

Forward velocity

5,8,13,20,30,42km/h

Reverse speed

5,13,30km/h

Tractive effort f=0.75

61.3kN

Maximum gradeability

20%

Tire inflation pressure

300kPa

Working system pressure

16MPa

Transmission pressure

1.3-1.8Mpa

Working parameters

Maximum steering angle of front wheel

±49°

Maximum slant angle of front wheel

±17°

Maximum oscillating angle of front axle

±15°

Maximum oscillating angle of equilibrium box

±16°

Maximum steering angle of frame

±27°

Minimum turning radius

6.6m

Scrape knife

Maximum lift height

410mm

Maximum cutting depth

515mm

Maximum tilt angle

90°

Cutting angle

54°-90°

Angle of revolution

360°

Length & chord height

3660*610mm

Oil filling amount

Coolant

50L

Fuel tank

280L

Engine

18L

Transmission

26L

Hydraulic oil

96L

Drive axle

28L

Balancing box

46 L