China Famouse BrZoomlion Rough Terrain Crane Rt50 Very Populaer

High quality 55Rough Terrain Crane RT55 CE and Ghost Certificate

Main Features:
1.Fullwheel drive, large ground clearance and strong offroad performance. It is suitable for off-road travel
2.Complete-extension, half-extension and complete-retraction outrigger operation, no-outrigger operation and driving with load
3.Fullwheel steering, short wheel base, small turning radius, strong maneuverability; it is applicable to driving and operation in a narrow field
4.The cab and operating room are integrated into one. Comprehensive lifting operation increases lifting capacity of the front.
5The utilization of network node control technique can realize intelligent fault diagnosis, facilitate the troubleshooting for the electrical system of the complete vehicle and improve the maintainability of the electrical system.
Technical Paramters

TypeItemUnitValueWorking performanceMax. rated lifting weight x working radiuskg.m35000x3.0Max. lifting moment of basic boomkN.m1344Max.lifting moment of longest boomkN.m870Max. lifting height of longest boomm31Max. lifting height of jibm46DimensionsOutline dimensions (LxWxH)mm11935x2980x3600Distance between outriggers (Longitudinal x transversal)mm6810x6800Main boom length (completely retracted - completely extended)mm9800~31000Jib length (completely retracted - completely extended)mm9088~15028Main boom angle of elevation°-3~78Swing range 360°continuouslyWorking speedMax.speed of single rope on the drum of main winchm/min150Boom extension times70Boom retraction times75Boom derricking up times46Boom derricking down times47Swing speedr/min0~2.5Hydraulic systemRated working pressureMPa27Rated working flowL/min400Hydraulic oil tank capacityL600MassComplete vehicle kerb masskg32000Front axle loadkg15030Rear axle loadkg16970TravelingMax. traveling speed (forwards / backwards)km/h38/15Wheelbasemm3820Treads (front / rear)mm2444Max. gradeability%57Min. turning radius (outer edge of the vehicle body)m6.5 Min. turning radius (2 wheels)m11.25
Notes: Explanations to Lifting Load
1) The rated lifting load value given in the table is the maximum lifting capacity when the crane is set on solid and level ground. The load should not exceed 75 % of the tip-over load;
2) The total rated lifting load given in the table includes the weight of hook and slings;
3) The working radius given in the table is the actual value including the deformation amount of the boom, so lifting operation should be carried out as per working radius.
4) 75 % of the tip-over load takes into account wind force 6, i.e. lifting operation still can be carried out with fully-extended outriggers when the wind pressure reaches 125N/m2, but lifting operation with tyres or traveling with load are prohibited.