China Feeding out Feeding Atc CNC Router 3 Axis CNC Milling Machine

feeding and out feeding atc cnc router 3 axis cnc milling machine

3 steps know how it works

Step 1:as the sheet is loaded ,the stack automatically raises to the next sheet

Step 2:the machine Traverse at the end of middle table ,then 3 suction cups are over the end of the panel, they pick it up with vacuum.at meanwhile ,pusher come out from fence and push the sheet to unloading table,it starts feeding all these parts down here ,until they break a light beam on this end. poisition device align the sheet.so that lines it perfectly on the table

Step 3:operator could put labels on and operator also take the parts off of the machine and it's real simple ,operator puts it on a stack or a rack or wherever.

Modelauto loading and unlodaing cnc routerX-Y-Z axis working area1200x2400x200mmMachine size2,200 x 9,000x2200mmRepositioning resolution0.02mmSystem resolution0.0025mmX-Y movementrack and pinion,gear drive/TaiwanZ movementball screw drive/GermanyGuidelinear 25 square/TaiwanMax.speed60,000mm/minMax.cutting speed40,000mm/minSpindle power9.6kw Italy HSD(ISO30,fan cooling ATC)Spindle speed24,000rpmInventer power11kw DeltaTool magazineRound 10 pcs tool changeDrive motorservo/JapanWorking voltageAC380V/50-60HZ,3-phaseCommand codeG codeComputer interfaceUSB 2.0ColletER32-3.175mm,6mm,12.7mmSoftwareArtcam&Alphacam software/UKControlsSYNTEC system/TaiwanPacking dimensions2700kgsStandard enquipment included

1.Manual oil lubrication system
2.Dust hood
3.T-slot vacuum table
4.Tool shanks

Pop up pins

easy operation

accurate position

Compact appearance

x axis -2

y axis -3

Tool automatic compensation system

Precisely detect the tool checking spot and

automatically input tool length data.

Quickly solve tool length compensation , especially to complicated work piece.

The automatic compensator equipped with crash-proof function to protect tool being from hurt when tools collide.

fan cooling type automatic tool change high

frequency spindle ES951

Spindle is made by HSD, Italy, the features are high speed and low noise. The spindle is passed test of IP65 water proof and dust proof.Ceramic bearing is thermostable. Max. speed is 24000RPM,heavy duty cutting is available for high precision and bearing abrasion. Inside and outside air cooling system enable long time processing At low temperature and prolong spindle's life.

Spindle standard specifications: ISO 30 HSD 9.6KW 24000RPM/4P/ long nose /380V/ air Cooling.

Centralized automatic lubricate system

Supplying lubricant at fixed amount by fixed time to prolong life of liner guide way and ball screw.equipped with detect system for short of oil, low pressure and high pressure.

special oil duct design to make sure supplying

lubricant from all oil injection spot.

servo driving motor 850W

YASKAWA, Japan servo motor,Σ-V system is

newest type, With high speed, high precision. Motor's max. torque can reach 350% which may shorten speed up and slow down time. The servo motor can response instantly. High resolution makes high Precision position and high precision procession.

Planetary type reducer

The reducer is made by famous manufacturer in Japan. The feature is small size, bearing big torque, high driving efficiency reducing wide range, high precision,high torque, low backlash and very quite.

(SERVOBOX) series products have following features: Low noise, low backlash, high efficiency, high input speed, high torque, high stability, high reducing ratio.

Servo Auto tool changers

10 tools position Carousel type

Stable

Easy for maintenance

Low maintenance cost

Fast changing speed

CNC controller, SYNTEC TAIWAN 21A

New three-axis linkage motion mode to achieve comprehensive controlling

Support drive and spindle error alarm function

Large storage space,fast reading speed

and reliable processing.

Support intelligent file checking function.

Parameter backup and restore function to prevent the loss of important parameters.

High anti-jamming intensity passes many CE tests.

1. the purpose of the autoloader is to get more productivity out of the CNC without requiring more people. one person can still operate the machine. all the materials handled automatically, and it really makes it a much simpler job for the operator.

2. when the gantry has positioned the material on the table, then a fence comes up in a pusher from opposite side ,presses it against it that aligns it in one axis ,then a pin pops up another pusher aligns it from the other end, so that lines it perfectly on the table. once it's aligned, those pins retract and the vacuum is automatically turned on.

3. there's a12 horsepower HSD head with a tool changer, and boring box an HST boring block, there's quite a lot of mass there , each of those heads has its own z-axis in there ,so between that and the maths behind their support there's a lot of mass.

1.Whole film packaging machine

2.Anti-collision package edge

3.Fumigation-free plywood wooden box with iron binding belt

4.According to customer's requirements for loading the whole container or LCL at Qingdao port.
Our Services