China Fiber Cement Board Wall Roof Sandwich Panel Internal Partition Wall for Residential Prefabricated Houses

Fiber Cement Board Wall and Roof Sandwich Panel Internal Partition Wall for Residential Prefabricated Houses
What is Partition Wall

The partition wall is composed of face panel and interior filling. The material of face panel is thin calcium silicate board and the middle is filled with lightweight composite core material, including cement, EPS, fly ash and ect. The quality and technology of product have reached to a new level and become the leading brand among the similar products.
The product has solid, lightweight, thin, better strength, impact resistance, strong hanging strength, heat insulation, sound insulation, fireproof, waterproof, easy cutting, increasing available space. It can be arbitrary slotting, dry operation, environment protection.

What are the advantages of Partition Wall

1. Light weight: The wall weight is about one third of the brick wall, which reduces the building load and reduces the construction cost.
2. Thin body: The thickness of the wall is about one half of that of the brick wall. The wall occupies less area and has a large practical area.
3. Solid core: the wall is non-foaming, no hollow drum, can be slotted, digging, single-point hanging force exceeds 50 kg.
4. Fast: The wall adopts the assembled dry construction method without plastering, and the construction efficiency is 5 times higher than that of the masonry method.
5. Fire resistance: The wall has good fire resistance and heat insulation performance. The wall temperature is only 60 ºC when it is burned at 1000 ºC for 1 hour.
6. Waterproof: The wallboard is directly cemented into a pool without waterproofing. After being filled with water, it is left for 48 hours without leakage.
7, Sound insulation: SGS authoritative testing, wall (100mm) sound insulation can reach 42dB.
8. Energy saving: The wall insulation effect is 3 times that of the brick wall, and the energy saving of air conditioning and heating equipment is 60%.
How to install A Prefabricated House

House Decoration Materials
1)Ceiling
2), Electric System
Wires, PVC tubes, circuit breaker, distribution box, switches, sockets, light fittings
3), Water System
PPR tubes, PVC tubes, tube connectors, valves.
4), Bathroom
Bathroom cabinet, shower room, bathtub, closestool, floor drain, angle valves, bibcocks, soft pipes.
5), Kitchen
Kitchen cabinet, wash sink, smoke exhaust ventilator with gas stove.
6), Wall Decoration
Putty powder, painting for interior & exterior wall and roof, ceramic tiles for walls, and skirting lines.
7), Floor Decoration
Ceramic tiles for floor, waterproof painting for bathroom and kitchen floor.
8), Door and Window
Entrance door, room door, bathroom door, living room window, bedroom window, kitchen window, bathroom window.
Simple installation process:
1.Put wire2.Cutting3.Put cement binder4.Put cement binder
5.Adjustment6.Installation7.Correction8.Fill the pulp9.Fixed

Why choose ZJT

1. Professional production equipment

2. Trustworthy quality, tested by SGS, TUV

SGS

--Compressive strength

--Impact test

--Hanging nail force

--Thermal conductivity

--Fire resistance tests

--Sound transmission loss

TUV

--Non-combustible

3. Project around the world

More information(catalogue, project, installation process) please contact:

Freda Lin
Xiamen ZhongJingTai Building Materials Co,. Ltd
Website: http://www.zhongjingtai.com/

Facebook: Freda Lin