China Fiberglass Modled Grating Machine FRP Grating Machine Mesh 38*38

Beijing ZLRC Environmental Protection Equipment company produces high quality FRP molded grating machine
Fiberglass Grating Machine detailed picture

The following are the specifications of the standard molded panels at present. We can also meet customers request for smaller sizes or thickness than the above by cutting or short pouring.Please note we do customized service!
Specification

Lengthxwidth
(mm)Thickness
(mm)Mesh (mm)Open area
%Weight
(kg/piece)1220x36602538x386955 1220x36603038x386965 1220x36603838x386983 1000x20002538x386925 1000x20003038x386929 1000x20003838x386937 1000x40002538x386950 1000x40003038x386958 1000x40003838x386974 1220x36605050x507296 1007x30071338x386919 1007x30074040x406458 1007x30072540x406436 1007x20072540x406424 1007x20074040x406439 1007x40072540x406448 1007x40074040x406477 1007x300725100x2566/5042/58 1220x36603819x1942110

FRP grating machine

1.Ejector rod lifting device is two cylinder to parallel advance ,smooth ,no waveing.
2.Stripping plate and stripping beam adopt elasticity connection,go up and down is parallel and steady.
3.The module using delicate 45# steel,grinding,polishing and the surface is plating.It has antiseptic function,smooth and easy to demould.
4.Ejector rod can go up and down along with lifting device,easy to change and easy maintenance.
5.Ejector rod is made from steel parts grinding ,surface smooth,firmness and wear resistance.
6.Hydraulic station adopt hydraulic parts made by Sino-Japanese joint venture, it is long-life and durable
7.Mould temperature rise and drop are achieved by rectangular copper pipe, which have large contact area with template, temperature rise and drop fastly,and it can heat the mould top surface. In terms of the four borders of the mould,it is anti-corrosion and durable.Joint adopt stainless soft joint,joint destuffing is convenience,anti-corrosion and durable
Cautions:
Before use the new mold clean up oil stains and other dirt inside the mold.Before use the mold please check if the screws loose or not. If loose, please fasten in time.Keep the mold slide adequate oil, prohibit knocking the I beam steel with hammer. Spray the demoulding agent three times, spray the agent after curing the last spray.After producing 3-4 grating sheets spray the demolding agent to the mold. Produce after the agent drying. In the following production please spray the demolding agent periodically according to the actual conditions.
Company Information
ZLRC is a leading and professional manufacturer of fiberglass products for over 20 years.Specialize in producing fiberglass composite product by pultrusion, SMC and SMC molding, hand lay out and RTM technology. The annual production capacity is about 8,000tons. ZLRC with complete sets of professional equipment from fiberglass raw material manufacturing to after treatment, There are 10 advanced FRP pultrusion production lines, SMC production line, FRP hydraulic equipment from 100tons~3000tons, RTM production lines and test machine etc.With decades of experience and performance based on excellent technology and dedication to the top quality standards in manufacturing and customer satisfaction. ZLRC ensures our solutions are the most innovative and cost effective ones.
As an ISO accredited Company, ZLRC shows committed to quality, customer and a willingness to improve efficiency. The factory covers an area of 70,000m2, of production workshop 40000m2, there are 260 excellent staff, 13 senior technician, and 40 technician.
ZLRC FRP has exported to South Asia, Middle Asia and Middle East, Europe, American and got high praise
Certificate

We are looking forward to cooperate with you! If you are interested, kindly feel free to contact us!