China Fire Alarm System Fire Alarm Control Panel Addressable Fire Alarm System

This FACP uses two buses mode, monitoring up to 242 control points of
every loops. Wall mount design makes it easy to use and operate. It is
compatible with complete range of our electronic coding, remote control coding
series' intelligent detectors, manual call point, input module, I/O module, etc.
The fire protection system can be divided into controller, detectors,
modules and operation terminals. The FACP is combined with main control
module, driver board and communication board.Main board is the core of the FACP, which contains CPU and interfaces to
other main and optional components of the system. It also has output of fire
alarm and fault. It is fixed on the cabinet's door and contains LCD display,
indicators, operation keys, 6 direct activation keys, 24 loop linkage control
keys, interface of printer and communication interface of the mother board .etc.The main board is the control center of the FACP. The hardware circuit
composites of SCM S344BOX which is the center of the FACP, extCircuit Board ended with
some memory chip card, keypad, LOscillator EDs and printer etc. The SCM communicates
data (send and receive orders), analyzes date, judges status and sends alarms
(sounder/strobe indicate, LED display, printer records, black box log, 485
communication, RS232 communication etc) via its asynchronous serial
communication interface, loop driving card and direct control output button.
The SCM can also receive the key operation information and login in relevant
menu interface; inquire or set the characteristic of the FACP, status information;
receive the power supply working status and send out relevant information.
All functions stated above are controlled by the software which built-in the
memory Chip card.
2.4 Main Technical Characteristi
2.4.1 Power Supply:
AC Power(Etching Machine Main Power): Input Voltage ~ 220VAC ( 175~ 245VAC)
Standby Power: Standby power supply with different capacity should be
configured according to different device points.
2.4.2 Operating Environment:
Operating temperature: 0ºC ~ +42ºC
Relative humidity: ≤95%, Non-condensing
2.4.3 Capacity:
Floor type: 64 Loops; Control Points of Each Loop: 242.
2.4.4 Display:
LCD display (Mode: HY-320240)
2.4.5 Dimension( L x W x H ):
420mm x130mm x 470mm;
2.4.6 Wiring Requirement
·For 485 communication cable and fire alarm bus cMagnetic Material able, it is recommended
to use UTP RVS2x1.0 MM
2OR RVS2x1.5 MM
2 twisted-pair cable; When
environmental interference is heavy, it is betteSurveillance, Control & Protection r to use RVSP2x1.0MM
shielded twisted-pair cable.
·It is forbidden to put the 485 communication cable, telephone line and fire
alarm bus cable in one multi-core cable.