Flexible metal Hose for Oxygen Burner
Parameter
length 18700mm, can be customizedID100mm nominal boreworking pressure25 baarTesll hose for Oxygen Bumering pressure32 barweight138kgsStructureflexible metal hose inside, double layer
braiding outside, collar and both end flangesMaterial of hosesus321Material of braidingsus304Material of flangesus304 carbon steelAll hose has no oil or grease
SpeedFor 99.9% oxygen, the flow rate is 380 m3 /
min, speed is 50 m/sMinimum bending radiusR=750mm
Construction of Flexible metal Hose
Inner Core: Corrugated Stainless Steel
· Flexible metal hose stainless steel core strengths are available in 304, 321 and 316L stainless steel
·Stainless steel tubing formed into corrugations parallel to one another
· Helical / Convoluted option available upon request
Outer Core: Braided Stainless Steel Layers
·Purchase corrugated core hose with no layers, single or double braided
· Flexible metal hose outer braid layers made from 304 stainless steel
· See braid layer code key at the bottom of this table
Benefits of Flexible metal Hose
· All metal hose - corrugated stainless steel core, sold standalone or with braided steel layers
· Pressure tolerances include full vacuum to those listed in the spec table below
· Application Temperature ratings from Cryogenic to 1500° F
· Meets or exceeds ISO 10380 at maximum working pressure
Company Information
We are professional manufacturer of all types of metal flexible metal hose and machinery, such as corrugated metal hose, square lock and interlock hose/ conduit with more than 25 years of experience. The hoses are widely used in many industries: gas hose, water hose and wire & cable protection circuit, etc..
The sizes are as follows:
Square lock hose and machinery:ID6-ID103
Interlock hose and machinery:ID3-ID350mm on different machine
Annular and corrugated metal hose: ID8 till ID600 on different machine
FAQ for hose
Q: Why so many suppliers choose us?
A:Because we are one of most professional manufacturer of the metal hose with more than 25 years of experience
Q:What sizes can you make?
A: all sizes from DN6 up to DN400
Q: What kind of fittings can you supply with the metal hose?
A: nuts, adapter, nipple, with BSP or NPT thread, we can customerized our hose according to your requirement
We need to know following information to give you our best quotation for the hoses:
A: Technical drawings
B: Material of the hose :sus304,321 or 316L
C: Material of the fittings, are they flange or pipe ends? Flange code?
D:Length and Diameter
E:Working pressure and temperature of the hose
F: Application of the hose
.