China Floating Switch-Sewage Water Level Switch

Cable ball float liquid level switch
Cable ball float liquid level switch By the use of plastic injection molding integrated devices, so structure strong, stable and reliable performance, at the same time, non-toxic, corrosion resistance, easy installation, low prices, multipoint control for a long, heavy water pump, volatile liquid or impurity liquid good control effect.
General liquid can also be used.Any length of cable length can be customized.LS - S cable float switch for metal cable ball float liquid level switch, for mercury switch contact parts, its characteristic is high temperature resistant, cable using high flexible cable, durable.Because of its simple, reliable, economic and convenient features, make it widely used in all kinds of large container liquid level control, especially in the municipal water supply and drainage, fire fighting, water treatment and other industries preferred
Detailed introduction to float switches:
Float switch; Liquid level switches; Float switch; Float level switch;
For sewage water, well water, acid or aqueous alkali corrosive fluid level control, pump control
Basic Parameter:
1. Rated Voltage: 220VAC
2. Rated Current: 10A
3. Rated Frequency: 50Hz
4. Power Consumption: 1.5 KW
5. Protecting Grade: IP68

Liquid TemperatureMin 0°C (32°F)
Max 60°C (140°F)Liquid DensityMin .65g/cm
Max 1.5g/cmProtectionIP68 @ 20m (65ft)Working Pressure.35MPaSwitching Speed600/minContact Life10 million switchesContact TypeMicroswitch with NO and NC contactsSwitching Angle25° (from horizontal)Max Voltage240VacMax Current10amp (COS 0)Cable MaterialNeoprene RubberCable SizeØ7mm / 3 x .75mm 2Housing MaterialABS - AcrylonineChemical ResistanceAcid- Good
Alkaline - Good
Petro - Good