China Floor Grinder Floor Polishing Machine Grinder Concrete Floor Grinder

1. CGM250 Floor Grinder introductionThe Floor Grinder is a sturdy, reliable and easy to use machine.
The Floor Grinder is fitted 2.2kw single phase motor. This motor offers a direct drive to the grinding plate with the incorporation of a flexible coupling between the motor and the plate.
The Floor Grinder has a foldable handle which enables it to be easily transported in the trunk of most small vehicles, the below picture for your review:Other Instruction during working:
(1)The machine is designed to operate with the wheels in contact with the floor at all times. Do not operate with wheels off the floor.
(2)Do not attempt to make any adjustments while the machine is in operation. Any adjustments must only be performed whenmachine is stopped and power disconnected.
(3)In the event of the machine pulling to one side all the time; adjust the axle height to obtain the best result.
(4)After a few minutes of grinding, check the wear out of the diamond tool due to soft concrete/abrasive concrete. We have a wide range of diamonds to suit every need.
(5)CAUTION-Line terminals may be alive whenmain switch is in the off position. Disconnect all power at source before performing any maintenance or repairs.
(6)WARNING-Donot operate the machine with any electrical panels open.
(7)WARNING- The CGM250 has an overload switch and will trip when under excessive load and will not allow the machine to be switched on if it is overloaded.
(8)Never use equipment that has not been tested and tagged (including cords).
(9)Before connecting the machine to power, check the condition of all power leads and cables on, or used in conjunction with the machine. Do not use it if any faults cuts; wear marks, bare wirePneumatic Tools s out of plugs or sockets.2.Specification
Model Spec.CGM250Rated Voltage230VPower2.2KW/3HPSpeed1410rpmPlate TypeStandard 250mm Grinding Disc or Grinding PlatePlate Bolt TypesM12x25 Countersunk socket headPacking Size750mmx500mmx800mmWeight70kgQuantity145pcs./40 container 70pcs./20container
3.Operation InstructionsThe Floor Grinder is designed to be used either wet or dryPacking Machinery . If the floor is being ground dry, ensure a suitable industrial vacuum is connected and that operator is wearing suitable breathing respiratory equipment.Starting the Grinder
Check the grinding plate being used is suitable for the material being ground and that they are correctly balanced.
Check that the grinding plate being used are in good order and properly attached, with all countersunk bolts firmly in place. Check this occasionally during use, as they can work loose during opeCapacitor ration.
Check that the grinding plate is adjusted so that it sits level on the ground.
Check that all nuts and bolts on the folding handle latch are tight and firm.
Raise the grinding plates from the floor.
Start the motor by pressing the black switch on the starter box.
Lower the grinding plate and commence grinding.Stopping the Grinder
De-press the red stop button on the starter box.
4.ApplicationRough surface grinding different kinds of concrete and masonry materials with superior efficiency.
4.Delivery time2 week for sample order, and 2-3 weeks for batch orders.6.Corediam introductionCorediam Tools Co., Ltd., as a high-tech enterprise, concentratesMachinery for Food, Beverage & Cereal on researching & developing manufacturing and marketing diamond tools industry. We have the most extensive, innovative and powerful range of diamond tools for construction, stone and DIYmarHorticulture & Gardening Products kets. Corediam strives to be the leading professional supplier in the world through technology innovation.