China Flow Meter

This type of meter is used to fuel dispensers for measurement of pressurized oil.
Materials:
Body: Aluminum (Spray-Painted)
Seals: Buna-N
Technical Specifications:
Discharge rate of each revolution: 0.5L
Diameter of rotary bar: 9mm
Rotary direction of rotary bar: Clock wise
Diameter of cylinder cover: 72.4mm
Environmental condition: -40~+70
Off-setting of crankshaft: 14.93mm
Travel of piston: 29.80-31.38mm
Adjusting range of piston quantity: 29.86mm
Minimum adjusting increasing quantity: 0.05%
Working pressure: 0.12Mpa-0.3Mpa
Repeat error: Not exceed ± 0.1%
Features:
Micro-accurate 4-piston, positive displacement type meter with rotary valve, exterior adjustment and double oil lip seal for long life.
External structure achieved by single body design of components.
Excellent accuracy: ± 0.2% with high flow through-put
100% tested before Ex-Factory
Replacement Parts:
Key Description Materials
1 Body Aluminum
2 Piston kits
3 Port Cap II Cast Iron
4 Stabilizer bar II Aluminum
5 Stabilizer bar I
6 Distribute valve PTFE
7 Up cap kits
8 Sealing Ring
9 Coupling
10 Rotary bar kits Cast Iron
11 Port cap I Buna-N
12 Sealing Ring Aluminum
13 Bushing
14 Bearing 1Cr18Ni9Ti
15 Adjusting disc Kits Brass with graphite
Package:
Product ID Net Weight Cross Weight Dimension
U101-A 5.3kg/case of 1 5.5kg/case of 1 27x23x22cm/case of 1
Ordering Specifications:
Product ID Product Name
U101-A Flowmeter