China Four Color Flexo Printing Machine

Four Color Flexo Printing Machine
I. Procedure:
Unwind System ---- Edge Position Controller ----Flexographic Printing Machine----Dry System----Automatic
Tension System---- Rewind System
II. Characteristics
1. Take it easy, accurate color, long life.
2. Use motors, variable frequency speed control, saving electricity, small running fluctuations.
3. Off printing roll automatic stop the ink-running motor, and up-printing roll automatic start running the ink.
4. Use special diagonal-tooth gear, accurate printing size.
5. Two sets of heating devices, including central heating and constant temperature control system for group
control.
6. Low-roller special steel processing, and special process, and plating thickness of 0.1mm protective layer of
hard chromium.
7 Alloy roll with hard oxidation, treating by dynamic balance, static balanced.
8 With cold wind bellows, and can effectively prevent produce with ink adhesion after printing
9. Print produce are clear and good arrangement quality.

Model YT-41600 Machine Colors Four Colors Max. printing width 1560mm Printing material PE Plastic Film,Roll Paper,Non Woven Fabric and so on Printing length 191-941mm Printing speed 15-90m/min Anilox roll Ceramic Register precision Longitude:±0.15mm Transverse:±0.15mm Rewinder/Unwinder DIA Unwind reel diameter: Φ1000mm
Rewind reel diameter: Φ1200mm Unwind and rewind material
holder By air shaft , 2 pcs Rewind and Unwind web
cylinder Φ76mm (inner diameter) Rewind System Auto tension system control Printing Pressure Mechanical adjust Drying way Electrical heat dryingElectrical drying power18 kw(it is special with double surface blowing ,wind cooling circulate,drying fast, also with high speed drying for fastness)Blower0.75Kw X 4pcsBlower of nature wind1.5Kw x2pcsMaster motor3.7Kw (Taiwan motor)Rewind motor2.2Kw (Taiwan motor)Powder brakes5 KgTension sensor2-30KgTension precision±0.3kgMaster power32KwDimension(LxWxH)4.8 x2.4x 2.4mBearingNSK (Japan)Power:Voltage 220V/380V/440V, 3 PH, 50/60 Hz