China Four-Color Flexography Printing Machine

USE:
Flexographic printing machine, also called aniline press which uses photosensitive resin plate as the printing plate of printing machine. It adopts environmental ink and has advantage of low edition-producing cost, this is an ideal machine for mass lots, large variety production manufacturer It is also snitable for printing HDPE, LDPE, PP. Cellophane paper, rolling paper etc.
FEATURE:
1. Easy operation, flexible starting, accurate color register.
2. The meter counter can set printing quantity according to the requirements. Stop the machine automatically at the quantity or when the material is cut off.
3. Pneumatic printing cylinder lift and lower, is will stir the printing ink automatically after lifting.
4. The printing ink is spread by the anilox cylinder with even ink color.
5. Reliable drying system coordinated with high-speed rotation, it will automatically break circuit when the machine stops.
6.360 continuous and adjustable longitudinal register device.
7. The frequency control of motor speed adapts to different printing speeds.
8. There are Jogging/Stopping buttons on the plate roller base and material rolling rack so as to make it easy operate the machine when the plate is installed.
Main technical parameters.

ModelYT-4600YT-4800YT-41000Max. material width600mm800mm1000mmMax. printing width560mm760mm960mmLength range of printing191~914mm191~914mm191~914mmAccuracy of Registration±0.5mm±0.5mm±0.5mmMax. diameter of material rollΦ450mmΦ450mmΦ450mmOutput capacity5~50m/min5~50m/min5~50m/minThickness of plate (including two-sides glue paper)2.38mm2.38mm2.38mmTotal power11.5Kw15Kw18.5KwWeight of machine3000kg3500kg4000kgOverall dimension(L*W*H)4300x1700x2500mm4300x1900x2500mm4300x2100x2500mm