China Four Way RF Power Divider with 2.92 Female Connector High Power Rating

Frequency Range:0.4-8GHzInsertion Loss:<3.5dBIsolation:17dBImput VSWR:1.5Amplitude Balance:±0.4DBOther Name:Rf 4 Way Power Splitter

Four Way Power Splitter RF Power Divider With 2.92 Female Connector
1 Four way power splitter information:
Power dividers and combiners are often referred to as splitters. While this is technically correct, engineers typically reserve the word "splitter" to mean an inexpensive resistive structure that splits power over very wide bandwidth, but has considerable loss and limited power handling.
A power divider divides an incoming signal into two (or more) output signals. In the ideal case, a power divider can be considered loss-less, but in practice there is always some power dissipation. Because it is a reciprocal network, a power combiner can also be used as a power combiner, where two (or more) ports are used to combine input signals into a single output. Theoretically, a power divider and a power combiner can be the exact same component, but in practice there may be different requirements for combiners and dividers, such as power handling, phase matching, port match and isolation.
2 Selling points about four way power splitter :

Low VSWR,High power ratingLow PIMMulti-Band Frequency CoverageLow Cost Design, Design to CostHigh Reliability and Maintenance freeMultiple IP Degree ConditionsRoHS CompliantCustom Designs AvailableN , DIN 4.3-10 connectors

3 Quick details:
Frequency range: 800-2700mhz/800-2500mhz/380-2500mhz
Impedance: 50ohm
Max power : 50w

Frequency range800-2700mhz/800-2500mhz/380-2500mhzImpedance50ohmInsertion LossLess than 3.5dbDimension230mm*120mm*30mmMax power50wConnectorNVSWR1:1.3Weight0.675kg