China Frac Hose Nitrile Rubber Hose Rubber Hose

NBR frac water hose

Tube and cover: Nitrile /PVC Blend, riOther Tools & Hardware bbed cover for maximum abrasion resistance thick wall.Connector & Terminals

Reinforcement:100% virgin high tenacity polyester Jacket

Color:Black, Red, Yellow, orange, Blue

Package:Rolled, packed in carton or loaded in pallet

Application:Water discharge, Transfers, Drainage, Irrigation installations, Pumping of sludge and liquid fertilizers, Irrigation, Chemical industry, Refineries, Air-pressure Standard length:15m(50ft), 20m(66fAnalysis Instrument t), 30m(Gas Generation Equipment & Parts 100ft), 60m(200ft), 90m(300ft), 200m(660ft), 300m(990ft),also can be customized according to requirements

Manufacturing Technology:through-the-weave technology without delamination issuesHose shall be made from 100% high tenacity synthetic yarn circular woven and completely, protected and locked-in by toughPower Tools highly resistant synthetic nitrile rubber, forming a single homogenous construction without the use of glues or adhesives of any type.

LiningProperties:

a.UltimateTensileStrength:Tensilestrengthoftheliningandcovershallnotbelessthan1500psi(10,500kpa).

b.UltimateElongation:400%minimum.

c.AcceleratedAgingTest

The tensile strength and ultimate elongation of the vulcanized rubber compound which has been subjected to the action of oxygen at a pressure of 300 psi +/-10 psi, (2100kpa+/-70kpa) and temperature of 70degrees centigrade +/-1 degree centigrade (158F+/-18F) for a period of 96hours shall be, greater than 60% of the original properties stated.

Temperaturerange:From-30Cdegto80Cdeg(-22Fdegto176Fdeg)

Abrasion Resistance:withstand 101000 cycles.