China Free samples Copper leaf flakes gold leaf flakes for artwork furniture ceiling decoration from China factory

1. FORGET PAINT, TRY COPPER LEAF FINISH ON YOUR FURNITURE AND YOUR VILLA
2. WE HAVE A PROFESSIonAL TEAM TO UNDERTAKE PROJECTS AT HOME AND ABROAD.
Click here, Get free samples
Product Description
Imitation gold leaf is also called composite gold leaf, Made from brass and a combination of zinc and copper.
Thickness is approximately 0.3-0.4 microns. which is beating by small metal material ,it can be apply on the surface of different material such as furniture, wood, glass, frame, wall, ceiling , temple, figure of buddha, tableware and many kinds of artware etc.
it is most popular metal leaf in market.
Gliding Gold Leaf
Imitation Gold Leaf: Gilding
Gilding adds luxury. It provides a wonderful base on which to display an intricate cut-out, and will lift a more simple one. As the gilding in this book is used for a background effect and is not being applied to an antique object, Dutch metal leaf is used rather than real gold leaf, which is more expensive and more difficult to use.
1.Paint the base with a layer of acrylic primer. Leave to dry, sand lightly, then use a tack-rag to remove any dust particles. Then paint on two coats of reddish-brown emulsion (latex) paint, sanding and tack ragging after the second coat to ensure a smooth surface.
2.Paint on a thin layer of water-based size, making sure that all areas to be gilded are completely covered. Leave to dry for 15-30 minutes until the size appears clear.
3.Remove a sheet of leaf from the book - do not remove its waxed backing. Try not to handle it too much; you may find it helps to wear cotton gloves. If necessary, cut the square of leaf with sharp scissors to a size marginally bigger than the area you want to cover. Gently lift the leaf by its backing and lower it on to the surface. Check its position carefully as, once it is laid, it cannot be repositioned. Press the leaf down by smoothing over the backing with your fingers, then lift off the waxed paper and discard. Cover the remaining areas in the same way, cutting the leaf and overlapping the joins.
4.once you have completely covered the piece, take a gilder's mop (tip) or a wad of cotton wool and smooth over all surfaces, paying particular attention to the overlapping edges. These should be smoothed over in one direction only. Attempt to remove the lines where the leaf joins as much as possible. At this stage, the aim is to ensure that all the leaf has adhered, rather than to remove any surplus.
5. Leave the size to dry thoroughly overnight. Then use the gilder's mop (tip) to remove the surplus leaf with a light circular brushing motion. If there are any bare areas, these can be covered by first applying size.
Last step: Spray protection oil (thinner spray first time),after 2 to 3 hours, spray protection oil again. (thicker spray)
Product Effects
Company Information
Our Services
1 .After sale service.Reply you any question within 24 hours.
2 .7days per week, 24 hours per day available.
3 .Free samples of imitation gold leaf can be offered, you can choose any models at this website and write to us.Then we will send samples by express courier like DHL ,TNT ,
UPS, FEDEX.
4 .Delivery time: 3days forsamples . 7-15days for bulk orders
5 .Reply you any question within 24 hours.
6 .OEM accepted , u can offer your design and we will produce as required
7 .Welcome to visit our factory.
FAQ
Q1: Are you trading company or manufacturer ?
A1: We are factory.

Q2: How long is your delivery time?
A2: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q3: Do you provide samples ? is it free or extra ?
A3: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q4: What is your terms of payment ?
A4: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below: