China Freezefats egt50 competitive price kryolipolyse machine criolipolysis machine cryo weight loss machine

Host display:

10.4 inch real color touch

Power

800W

Cooling liquid

Pure water

Vacuum

650mm Hg

Vacuum pressure

0-106Kpa

RF frequency

5Mhz

Key Technology
1,Minus 20℃ freezing vacuum sculptor

2,40KHz strong wave cavitation

3,RF fat dissolve

Main Function

1.Body shaping,fat dissolving,repel the cellulite.

2.Lymphatic drainage,promoting metabolism&blood circulation.

3.Decrease the excessive water and prevent the fat from accumulation.

4.Tightening skin,strengthen skin elasticity,skin lift

5.Clear belly wrinkles,especially the stretch marks.

6.Complementing the collagen,skin rejuvenation.

Preparation Before Use

1. Install the 4 attached caster wheels on the machine, fasten the screws.

2. Install the attached on-hook on the machine, put the probes into the corresponding racks.

3. Before using the Cryolipolysis Fat freeze Slimming Machine, it is required to open the inlet

and overflow behind for adding distilled water or purified water.

4. Connect the attached water funnel to the inlet, start adding purified water until water flows

out from the overflow, and then close the inlet and overflow.

5. Check the host power cable is connected.

6. Check the key switch of machine is connected.

Cryolipolysis Treatment settings

(Put on the Anti-freeze Mask on the treat area)

1. Usually 30-60 minutes for each part(depending on thickness of fat and health status,After 25-30 minutes of treatment, press the pause button to suspend the suction, check and add antifreeze fluid..)

2. Can only treat cellulite part by part, for example, to eliminate cellulite of the entire waist, you need to complete several courses.

3. Take a another cooling procedure at the same position 1 or 2 months after the first course, which can reduce the extra fat layer thickness, twice treatment, can enhance the effect of cryolipolysis, but not recommended to accept treatment repeatedly at random.

4. Cryolipolysis cool-sculpturing treatment is designed for those physically healthy people who have local fat deposits, but not suitable for the one with overall obesity. It can target at the fat at a specific part, such as waist, abdomen, back, etc. The treatment is not a panacea, it can not treat obesity. It is not a substitute for liposuction or other invasive treatments. Substantial weight loss should be achieved through a balanced diet and regular exercise, cryolipolysis cool-sculpturing treatment can only eliminate the extra fat.

5. Use appropriate and constant suction intensity, the suction intensity is adjustable according to the patient's individual vulnerability.At the same time, the mode of suction and massage can be used.

6. Qualified antifreeze fluid is necessary to avoid frostbite during the treatment process when the temperature is reduced to 0 to -40 degrees. [Consumables, purchased by the user]

7. After the treatment, skin injury, minor frostbite, or pigment may occur, pay attention to take good care of it.

Do the treatments like the following Steps, Circle and circle, Control the whole treatment within 30 to 60 minutes base on fatness n n n in different individuals.(If you Set the intensity lower than 6,you can suck the cryo handle n n n in one area for longer, but need o o o to check the treatment area every 20 minutes to check the redness & brusing)

Cavitation Treatment settings

1.The CAVITATION treatment focuses on the abdomen, thighs (“saddle bags”) and flanks (“love handles").

2.Treatments are 20 minutes long, covering a body area the size of an A4 page.

If you want a larger area covered, treatment time can be extended.

3.Drink at least 2 liters of water before your treatment and another 2 litres in the day after your treatment (soft drink, soda, juice or tea is not water).

4.Do not drink ANY alcohol or caffeine in the day of treatment of 48hrs after.

5.Use Dry Skin Brushing daily to stimulate lymph movement (your Naturopath will show you how to do this).

6.Do not have a hot shower (warm is alright), spa or sauna straight after treatment.

7.Diet: Follow a fat free, low starch, low sugar diet for best results (your Naturopath will give you an info sheet).

8.Exercise: Do brisk exercise for at least 20 minutes after your treatment to stimulate lymph movement.

9.An average of 2 cm reduction in circumference was achieved after a single treatment of the abdomen,outer thighs, or flanks.

RF Treatment settings

1.RF treatment takes 20 minutes in generally. Treatments can be applied to the arms, buttocks or thighs to aim for skin tightening, reduced improvement in stretch marks and fat dissolve.

2.The optimal frequency for using Focus Fractional RF is 2 -3 times a

week for 6-8 weeks. It is recommended that the Focus Fractional RF device not be used more than once every other day.

3.Letting the skin rest in between each treatment is important to allow the natural process of the skin’s collagen renewal to take full effect.

4.Keeping in mind that the treatment does not stop the aging process:

- For Cellulite - results typically last a few months if a regime of diet and exercises is followed. For longer term results the customer needs to return for maintenance treatments every 4-8 weeks.

After-sale Service And Maintenance

The term of maintaining guarantee is main device 1 year and spare part 3 months from the date of purchasing according to the receipt. (Expendable is not included in it.) Others not included in maintaining guarantee or over the time, we also supply to maintain and renew but need charges. Please contact with the dealer if need change of purchasing the parts and easily expendable products.

A. We will guarantee the quality of our equipment, normally there is no quality problem

1.If there is a deficiency, please email or call us on the reasons, it would be best to dealt with by emailor telephone.

Because some of the problems are caused by using the machine in a wrong way.

1.24 hour online service
2.We offer OEM&ODM service.
3.We offer free samples for you to test the quality.
4.Package customize is welcomed!
5.Our products are approved by CE and ROHS

Q: Are you a manufacturer or a trading company?
A: Yes, we are a manufacturer. Health care products are main product of our plant, and plant extract are also our hot selling items from our brother plant.

Q: Can you accept customization?
A: Yes, we offer OEM/ODM scrvice.You can custom every similar product you want.

Q : Does free sample be provide for market testing?
A: Yes, most free samples are offered directly, such as female care products, slimming patch, pain relief patch, hemorrhoids gel, delay spray etc, by the way, the freight cost need pay by your side. If you want the sample with your requirment, such as ingredient. packaging, you need pay the mould fee, we will refund it to you when you make order.

Q: Do you provide certificate?
A: All tests required for export are provided.