China Fruit Vegetable Drying Equipment

Fruit and Vegetable Drying Equipment
Description:
Fruit and Vegetable Drying Equipment is a continuous penetrating flow drying equipment applied for drying pieces strip and particles state materials with good ventilation. The machine is suitable for the materials such as dewatering vegetable, herbal medicine of Traditional Chinese medicine and others, for which the water contents are high and high drying temperature is not allowed. The machine owns the advantages, of fast drying speed, high evaporation capacity and good product quality. The de-watered & altered cake state paste material should be made into particles or strips before drying process.
Principle:
The materials are uniformly put on the mesh-belt by the material charger. The mesh-belt uses generally 12-60 mesh stainless steel wire net and it is drawn and moved inside the drier by a transmission device. The drier is composed of serveral units. For each unit, the hot air is circulated separately. Some exhausted gas is discharged with a special moisture elimination blower. The waste gas is controlled through an adjustment valve. The hot air passes through the mesh-belt covered with the material from the top to the bottom or against and this will complete the heat and mass tranfer process. This process will bring the material water away. The mesh-belt moves slowly, running speed can be freely adjusted according to the material temperature. The final products after the drying will fall into the material collector continuously. The top and low circulation units can be freely equiped according to the users demand. The unit number can be selected according to the demand.
Applications:
Roasted seeds, De-watering vegetable, particle feed, monosodium glutamate, shredded coconut stuffing, organic color, compound rubber, acryl fibre, medicine product, medicine material, small wooden product, plastic product, aging and solidification for the electronic component and device.
Technical parameter
Type
DW-1.2-8
DW-1.2-10
DW-1.6-8
DW-1.6-10
DW-2-8
DW-2-10
Unit Number
4
5
4
5
4
5
Belt Width (m)
1.2
1.2
1.6
1.6
2
2
Drying Section Length (m)
8
10
8
10
8
10
Thickness of Material Covered (mm)
10-80
Temperature (ºC )
60-130
Steam Pressure (Mpa)
0.2-0.8
Steam Consumption (Kg/h)
120-300
150-375
150-375
170-740
180-500
225-600
Drying time (h)
0.2-1.2
0.25-1.5
0.2-1.2
0.25-1.5
0.2-1.2
0.25-1.5
Drying Strength (Kg H2O/h)
60-160
80-220
75-220
95-250
100-260
120-300
Total Power of Blower (Kw)
9.9
12.1
9.9
12.1
18.2
22.2
Total Power of Equipment (Kw)
11.4
13.6
11.4
13.6
19.7
23.7