China Full Automatic Disposable Surgical Medical Face Mask Machine

RYA-P30 Full Automatic Face Mask Machine

Introduction:

The working principle of the mask machine is to load the multilayer non-woven fabric from the roll material and carry out the forming machine. Folding and pressing, nose bridge tending, mask forming, mask cutting, ear band feeding and welding, finished product unloading, etc. Make a mask with a certain filtering performance. The mask production line is not a single machine. It consists of a feeding part, a molding machine, a conveying line, and an earband welding machine. It is a complete automated production line combined with different machines.

Material of mask (SMS Structure):

Main Technical Parameters:

Model

RYA-P30

Working speed

100pcs/min

Mask layers

3~4 layers

Control system

English/Chinese

Mask size

175*95mm

Control mode

PLC + touch screen

Mask structure

Outline/inner line

Machine material

Aluminum alloy + Section steel

Operator

1 worker multiple machine

Gross weight

about 5000KG

Outline dimensions (L*W*H)

7000*6500*1900mm

Eligibility rate of equipment production

99.0%

Equipment failure rate

2% (refers to the failure of the equipment itself)

Power

10KW

Compressed Air

0.5~0.7MPa, Flow: 300L/min

Working surroundings

Temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness is not less than 100,000 grade)

Special Features of the Machine:

A. Using aluminum alloy structure, beautiful and strong without rust.

B. Computer PLC programming control, high stability, low failure rate and low noise.

C. With imported servo motor and stepper motor drive, high precision.

D. Electricity detection of raw materials to avoid mistakes and reduce waste.

E. One body can be connected to one to three inner ear straps or outer ear straps as required.

F. The machine adopts pulley and fixed feet, which is convenient and quick to move, strong in stability, and does not shake.

G. This model is equipped with a new advanced conveyor belt, with high accuracy, without manual counting, just sorting and packing.

H. The equipment can be modified according to product requirements, product size, length and thickness.

I. Different ear-band machines can be configured according to different production orders, which is economical and practical.

Main Configuration of the machine:

No.

Name of parts

QTY

1

SS out-layer non-woven cloth / Filter non-woven cloth / SS inner-layer non-woven cloth un-winding feeding reels

3 ~ 4sets

2

Nose bridge strip un-winding device

1set

3

Nose bridge strip drive and cutting device

1set

4

Cloth side - folding device

1set

5

Cloth face – folding device

2sets

6

Welding side sewing device

1set

7

Sealing device

1set

8

Transfer device

2sets

9

Bypass flow device

2sets

10

Ear-band welding device

2sets

11

Output device

2sets

12

Operation system

1set

13

Operation Panel

1set