China Full Automatic Formation Tank

Automatic Battery Formation Tank (Double tank)
I. Application
Water formation tank with automatic battery loading and unloading.
Firstly fill the water into the water bath automatically, batteries will be delivered to the water tank automatically, then automatically loading into the automatic tank. After formation, the batteries will be delivered to outside tank conveyor (the water still inside the tank)
II. Main parts list
Formation tank

DescriptionSpecificationMaterialQtyUnitWater bath Length 10000xWidth 650mmPVC14mm2pcs Stainless steel frameLength 10000xWidth 1610mm3041setOutside tank conveyor 600mm widthPP2setDrive system2.2KW including speed reduce motor3042setSealed door 4pcCycling water pipe DN40PVC Thermal insulation pipe2setControl systemPLC control, including thermal insulation PP2setFrequency converterMitsubishi 2setTemperature probeTwo detect the temperature of circulating water and two detect the temperature of electrolyte. 8pcWater inlet electric valveDN40 2pcTank insulationAccessory 2setsAbove list is for one set of double tank, the proposal need 15 sets of above list.
Automatic loading and unloading cart
DescriptionSpecificationMaterialQtyUnitAutomatic loading cart Accessory304ss1setAutomatic unloading cartAccessory304ss1setAutomatic loading control systemAccessory 1setAutomatic unloading control systemAccessory 1setTrack of loading and unloading cartDouble track3041set
Circulation Water Cooling System (Chiller)
I. General
This proposal is made for the cycling water cooling system used for the formation tank, primarily used for the cooling inside the tank.
As the batteries generate heat during the charging process, the surface temperature of the
batteries will increase. But, according to the craft requirement, this temperature needs to e
regulated and controlled to achieve the optimum effect. Thus, it is required for us to apply water
cooling inside the tank during charging. This cycling water cooling system is composed of cooling equipment, variable frequency water supply device, and the cycling cooling channels.
A Cooling tower is used as the cooling device in this system. The air inside the cooling tower gets in contact with the water (direct or indirect) to achieve the heat exchange, thus cool down the water. A circular counter-flow cooling tower is used in this process. Water, acts as a recycling coolant in this case, releases the heat it absorbed from the system back to the atmosphere. This reduced the air temperature inside the tower and enables the cooling water to be re-used again.
The water supply uses a variable frequency water supply device to ensure a constant pressure
inside the pipeline.
II. Technical Performance
DescriptionSpecificationMaterialQtyUnitWater cooled low temperature screw chiller300P,output water:-10ºC 1setCooling tower 350T 1setCooling water pump18.5KW 3setsDouble layer insulated stainless steel ice bucket10T 1setHeat exchanger50m2316L1setInsulated water storage tank10m3PP3pcsReturn water storage tank5m3PP1pc Return water pump20m3Acid and alkali resistance2setRecycling water pump20m3Stainless steel2setWater supply pump20m3Stainless steel2setVacuum water tank Steel lined plastic1setElectric control cabinet (including frequency converter) 1setCirculating internal insulation pipeline PVC thermal insulation pipe 1setAbove list is for one set of chiller