The whole line is centralized control by PLC. The whole Line's program design is reasonable, with high automation & easy operation.
Washing and drying machine is the core equipment of the whole line.
The upper Rubber rollers, brush rollers and air-knives etc. Can be adjusted on the panel and digital displayed according to the thickness of glass to be processed. The upper section of the machines can be elevated by 450mm for convenience of cleaning and repairing. The Brush Rollers are driven by r motors with upper and lower separately.
Allocation of one soft brush and two hard brushes (can be lifted when needed) in the upper washing sector is designed for washing hard LOW-E glass, coated glass without damaging the coating.
Two Stainless steel air-knives, the blower equipped with muffle cotton and air feeding filter screen pack ensures plenty of air, less noise and the good drying effect.
In the laminating room the laminating table, brace of the up-down device, positioning cylinder, PVB film unwinding machine, movable scissor cup suction hunger, convenient for processing of large and big glasses.
Every single processing glass can be conveyed in a higher speed to enter into the Pre-laminating and press section and regulated automatically the speed to running at the same speed with the Pre-laminating and press section which can make room for the next pieces of glass which improves the running efficiency of the Line.
Pre-laminating and press section has reasonable structure and informal opening program.
The integrity is controlled in laminating room with its stable running function.
Speed regulation is frequency variable.
Guarantee Periodone yearBest Servicelong-term technical supportOther SupportsEnglish Software & Instruction, Detailed Videos