China Fully Automatic Kf94 Fish Shape Mask Machine

Fully Automatic KF94 Fish Shape Mask Machine
--Product Specification--
1. Basic Introduction:
This equipment is a one-to-one fully automatic fish mask machine, which can produce fish mouth mask products suitable for KF94 in South Korea and DS2 in Japan. The size and appearance of the mask can be customized; the entire machine is from filming to ear strap welding All have realized a high degree of automation, simple and convenient operation, small size, which is conducive to site planning; the technology of this machine is mature, stable and reliable, and the failure rate is extremely low. The products have been exported to South Korea, Vietnam, Japan and other countries and are well received.
2. Specifications:
Product size: Foldable masks in circulation size on the market, knife molds can be designed according to product drawings;
Material width: recommended width: 240mm, compatible width: 260mm
Capacity range: 80~120 pieces/min
Applicable power supply: 220V/380V, 50HZ/60HZ
Applicable air source: 0.5∽0.7Mpa
Rated power: 12kw
Machine size: Material rack: 1650 x 700 x 1700; Body: 2200 x 600 x 1500; End: 2000 x 700 x 1900;
Machine weight: weighted in sections, no more than 400 KG per section.
3. Product size chart :
The whole machine is composed of three sections, which are the material rack (1650mm x 700mm x 1700mm) and the main body (2200mm x 600mm x
1500mm) and the end (2000mm x 700mm x 1900mm). The combination of material rack and body is also called punching machine, and the end is also called ear punching machine.
3.1. Top view
3.2. Floor plan
4. Working area:
It is recommended that the single machine work area is 50 square meters, which can be divided into aisles, machine occupancy area, operation area and packaging area according to functions. In
When conditions permit, try to reserve a 1-meter wide aisle around the machine to facilitate machine repair, debugging and maintenance.
5.Product Features:
The whole machine consists of the material rack part, the upper nose line part, the shape welding part, the folding forming, the shape cutting part, the turning part, the material dividing part,
The ear strap part and the collection part are composed of servo motors and ultrasonic welding technology to complete production.

5.1. Material rack part: inflatable shaft, magnetic powder brake and controller to ensure that the material tension is moderate and does not wrinkle;
5.2. Upper nose line part: the cylinder is ultrasonically welded to fix the nose line of the required length to the material;
5.3. Shape welding part: mold with ultrasonic, preliminary pattern welding;
5.4. Folding forming: folding fabric;
5.5. Shape cutting knife part: custom cutting knife, roll cutting forming, at this time the mask is initially formed;
5.6. Turning part: turning the mask over to prepare for ear straps;
5.7. Material distribution part: reasonable allocation, increased production capacity;
5.8. Pointing ear strap part: special rotating disc for mask machine industry, with ultrasonic wave to spot weld the ear strap line on the semi-finished mask, and the mask is formed.
5.9. Collecting part: belt out, product collection.