China GR-1 1L High Precision Efficient Digital Display Double Layer Agitator Tank Jacketed Glass Reactor

GR-1 1L High Precision Efficient Digital Display Double Layer Agitator Tank Jacketed Glass Reactor
Applications:
Speed-regulation glass reactors are mainly used for synthetic reaction, distillation and concentration of different types of materials. We have single wall, double wall and triple wall glass reactors. The reactor can be pumped to a negative pressure state according to some experimental requirements. A constant pressure funnel or an adjusting valve on the feeding bottle Circulating liquid can be filler into the jacket to heat or cool materials inside. Triple wall glass reactor with two jackets, the inner jacket is for circulating liquid, and the outer layer should be pumped to vacuum condition for thermal insulation.
Advantages:
High borosilicate glass has good physical and chemical properties.
Wide working temperature range: -80ºC to 200ºC.
It can work under normal pressure and negative pressure, its vacuum degree can reach to 0.098Mpa.
The vessel can withstand the pressure range from -0.1MPa to 0MPa.
Teflon (PTFE) and FV rubber material cock or discharge valve; Sealing together with PTFE covered O ring.
ModelGR-1Electrical Requirements1Phase, 220V/50HzGlass PartsGlass Vessel Capacity 1LCooling/Heating Jacket Capacity 0.3LGlass TypeFood grade borosilicate 3.3Temperature Range-80~200ºCWorking Pressure -0.1 MPa~Ordinary pressureCooling Surface of Condenser250cm2Capacity of Constant Pressure Funnel200mlEndurable Temperature Difference90ºCVessel CoverDomed with 5 openings5 OpeningsOpening for Stirring Shaft24# standard Ground MouthOpening for Temperature Sensor24# standard Ground MouthOpening to Connect Condenser24# standard Ground JointOpening to Feed Liquid Material19# standard Ground MouthOpening for Constant Pressure Funnel24# standard Ground JointStirring Parts
Motor Power70 WControllerDigital controller with variable frequencyRotation Speed50~500 rpmStirring ShaftPTFE covered stainless steelStirrer4-blade propellerMax. Torque70 N-cmMax. Viscosity Mpas100000SafetyOver-heat, Over-load protectionDrain Valve1. Without dead volume 2. 100~260mm Above Floor (adjustable)Inlet/Outlet of JacketFlange Connection, IDφ12mmVacuum Sealing PTFETemperature SensorPTFE reinforced stainless steel, Chemical ResistantSupporting frameStainless Steel 304SafetyOver-heat, Over-load protectionDimensions(mm)405Wx420Dx1020HNet WeightGR50 KG
Our Service