China Garnet Abrasive Grit Garnet Abrasive SNon-Metallic Almandite Garnet for Surface Cleaning

Garnet Abrasive Grit/Garnet abrasive sand/non-metallic Almandite garnet for surface cleaning
1.Garnet Sand Picture
2.Garnet Sand Introduction
The sandblasting level of garnet sand is very high. It can penetrate into the holes and uneven parts to completely remove the oxide layer, corrosion, residual salts, burrs and other debris. The sand-blasted surface has no insert, no adverse convex point and pits, no embedded sand,and achieves SA3 blasting level with uniform surface roughness.
3.Garnet Sand Specification

Physical ItemsGrainsColorRed brownToxicityNoneWorking Temperature1300 degree CelsiusConductivityLess than 25 /mSpecific Gravity4.1g/cm3Mohs Hardness7.5-8.0Average Bulk 2.4 g/cm3Soluble Salts Less than 100 ppm

4.Garnet Sand Production Technology
5. Garnet Sand Applications
Garnet sand surface roughness can reach 45-55,50-75 microns. After sandblasting, the surface roughness is moderate which can effectively reinforce the adhesion between coatings and substrate.
6. Garent Sand Quality Test and Test Equipment
7.Packaging
----Normal packaging:25kg/pp bag, then 40 bags in one ton bag .
---1000kg in one ton bag.
8.FAQ
Q. Can you provide the free samples?
Yes, we can send free samples less than 500g to you. Normally, we can send samples
to customer byexpress, such as DHL,TNT,Fedex,Aramex, etc.

9.Company Profile and contact
Jinan Junda Industrial Technology Co.,Ltd garnet sand production capacity raise from thousand tons reach more than ten thousand. We have the good reputation in garnet industry all over the world.