Rolling Door Control Board, Roller Door, Automatic Rolling Door manufacturer / supplier in China, offering Rolling Door Control Board with Transmitter (VG-DRC-5), Universal Receiver (VG-DRC-3), Supply 2 Motor 24V Swing Gate (VG-DRC-6-24V) and so on.
Min. Order / Reference FOB Price | |
---|---|
10 Pieces | Contact Supplier |
Local Area: | Beijing, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | T/T, PayPal |
Frequency: | 433.92MHz/868.35MHz |
---|---|
Input Voltage: | 230 V Power Supply |
Specification: | CE, RoHs |
2035 TECHNICAL data:
- Power supply: 230 Vac 50-60Hz 4,5W max.
- Flashing light output: 230 Vac 500 W max.
- Motor output: 230 Vac 500 W max.
- Aux. power output: 24 Vac 3 W max.
- Button and safety device input: 24 Vdc
- Working temperature: -20 ¸ 85 °C
- Radio receiver: refer to type
- Op. transmitters: 12-18 Bit or Rolling Code
- TX max. codes in memory: 60 UP, 60 DOWN or 60 P/P
- Dimension of panel: 110x121x47 mm.
- Container: ABS V-0 ( IP54 ).
OPERATING CHARACTERISTICS:
Step by step operation:
By using either the radio control (LED CODE on) or the low
tension button panel (PUL) to operate the gates, commands will
have the following effect:
The first command impulse activates the opening mechanism
until time expiry of the timing motor, the second command
impulse closes the gate, if a command impulse is received
before the time expiry of the timing motor, the direction of
movement of the mechanism will be halted.
A further input implements the re-starting of the motion in the
opposite direction.
Automatic closing:
The control board may be set up automatically to close the
gates.
The set-up procedure is described under the instruction for
setting the delay period.