Rolling Door Control Board, Roller Door, Automatic Rolling Door manufacturer / supplier in China, offering Rolling Door Control Board with Transmitter (VG-DRC-5), Universal Receiver (VG-DRC-3), Supply 2 Motor 24V Swing Gate (VG-DRC-6-24V) and so on.
Min. Order / Reference FOB Price | |
---|---|
10 Pieces | Contact Supplier |
Local Area: | Beijing, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | T/T, PayPal |
Frequency: | 433.92MHz/868.35MHz |
---|---|
Input Voltage: | 230 V Power Supply |
Specification: | CE, RoHs |
2102 TECHNICAL data:
- Power supply : 230 V ac 50-60Hz 1100W max.
- Flashing beacon output : 230 V ac 500 W max.
- Motor output : 230 V ac 500 W max.
- Auxiliary power output : 24 V a/c 3 W max.
- Stop limit and low voltage commands : 24 V cc
- Working temperature : -10 ¸ 55 °C
- Radio receiver : see model
- Op. transmitters : 12-18 Bit or Rolling Code
- Max stored TX codes : 215 (CODE + CODE PED)
- Box dimensions : 110x121x47 mm.
- Container : ABS V-0 (IP54).
FUNCTIonAL data:
Step-by-Step Operation:
Using both the radio control (CODE LED illuminated) and the
low voltage push-button station (PUL) to control the gate, the
following operation is obtained:
the first impulse opens the gate until the motor timer reaches
zero or until the opening stop limit is reached, the second
impulse closes the shutter; if an impulse arrives before the
opening stop limit is reached, the control unit stops motion
during both opening and closing. A futher command restarts
motion in the opposite direction.
Automatic closing:
The control unit can close the gate automatically without
sending additional commands.
The selection of this operation mode is described in the Pause
Time programming mode.