China Gcu-100 Generator Automatic Control Protection Module

GCU-100 Generator Automatic Control and Protection Module
GCU-100 Generator Automatic Control and Protection Module is suitable for most generators available on the market, it is equipped with graphical warning signals and 3 sets of 4 digits LED display to display the real time 3 phase voltage, current, frequency, battery volt, running hours and setting values.
Features
Micro-Processor Auto Control & Protection
Three Sets of High Illuminating LED Display Suitable for Indoor and Outdoor Use
Full Function Modularized Design for Easy Installation
All Functions Setting Can Be Done Directly On GCU-100 No Need For PC Connection*
All settings are recorded into the internal (EEPROM) and protected from erasure even without battery
Easy to Understand Graphical Warning Signals
DIN Rail Terminal For Easy Installation
IP65 Waterproof Front Panel
*User can Program, Change and Cancel Protection and Warning Settings according to the requirement
Specifications
Model No. GCU-100
Power Input Voltage 9~35 VDC (12V, 24V)
Sensing Input Voltage 15~510 VAC
Frequency 50/60 Hz
Power Dissipation Max. 5 watt
MPU Signal Input Voltage ± 2 to ± 70 VAC
Frequency Min. 100 Hz, Max. 10 kHz
CT Specification Burden Above 2.5 VA
CT Secondary Ratio 5A
Protection & Alarm Status
Engine Start Failure
Emergency Stop Activated
High Engine Temperature
Low Engine Oil Pressure
Engine Over & Under Speed
Abnormal AC Volt
Generator Over Load
Low Fuel Level
Charge Motor Failure
Abnormal DC Volt
Scheduled Maintenance Warning
Free Programmable warning
Panel Display
Fixed or Circulating Full Phase Voltage, Current and Frequency
Engine Operation Hours
DC Voltage (Battery)
Delay Countdown Display
Environment Operating Temperature: -20~70 ° C
Relative Humidity: Maximum 90%
Max. Vibration: 5~25 Hz, ± 1.6 mm, 25~100 Hz, a=4G
Panel Installation Cut-Out 137.0 x 137.0 ± 0.5 mm
Dimensions 147.8 (L) x 147.8 (W) x 62.3 (H) mm
Weight 604G ± 2%
We supply Kutai Series Control Panel as the following:
Generator control units
AMF-10
GCU-20
DSP-10
DSP-30
DSP-52
ECU-02
ECU-04/ECU-05
GCU-10
GCU-100
GCU-2000
GCU-3000
RA-20
Generator controller accessories
AMF-10R
ECU-11/ECU-22
ECU-40
GCU-11R
KCU-01/KCU-02/KCU-03
PTU-03
PS-01
TS-01
For any details please do not hesitate to contact with us, thank you!