China Generator Spare Parts Auto Start Load Share Controller Dse7510

DSE7510 Auto Start Control Module The DSE7510 is an Automatic Engine Control Module, designed to provide advanced load share functionality for diesel and gas generating sets that include nonelectronic and electronic engines. The module also provides excellent engine monitoring and protection features.The module's load share functions include automatic synchronizing with built in synchroscope and closing onto dead bus. Direct and flexible outputs from the module are provided to allow connection to the most commonly used speed governors and automatic voltage regulators (AVRs). The module has been designed to combine a maximum of 16 generators and 16 mains (utility) supplies up to a maximum of 20 in one system, e.g. 16 generators and 4 mains (utility) supplies .DSE7560 required to synchronise with the mains (utility). The module has the ability to monitor generator under/over volts, over current, generator under/over frequency, under speed, over speed, charge fail, emergency stop, low oil pressure, high engine temperature, fail to start, low/high DC battery volts, fail to stop, generator short circuit protection, reverse power, generator phase rotation error, earth fault protection, loss of speed signal, fail to open, fail to close, out of sync, open circuit failure, negative phase sequence and loss of excitation.

Model:DSE7510Origin:The UKPanel Cutout:220 mm x 160 mm (8.7" x 6.3")Weight:1KGMOQ:1 pcs per itemPort:Fuzhou,Shanghai or other port in ChinaPacking:Box+Carton+PalletPayment Terms:T/T,L/C at sight,Western Union,Money GramBrand:DSEDelivery:5 work days after receipt of payment

Module has been designed to control single diesel or gas gen-set applications.
FEATURES
• Electronic engine capability
• RS232 or RS485 remote
communications
• Modbus RTU
• Pin number protected front panel
programming
• Exercise timer
• Back-lit LCD 4-line text display
• Multiple display languages
• Voltage measurement
• Configurable inputs (9)
• Configurable outputs (5)
• Automatic start
• Manual start
• Audible alarm
• LED indicators
• Built-in governor and AVR control
• Engine history event log
• Engine protection
• Fault condition notification to a
designated PC
• Front panel mounting
• PC configuration
• Bus failure detection
• Configurable alarm timers
• Configurable start & stop timers
• Automatic load transfer
• SMS alert messaging
• Remote monitoring
• Magnetic pick-up
• kW overload alarms
• Engine temperature alarms
LOAD SHARE FEATURES
• No-break transfer
• Peak shaving/peak lopping
• Sequential set start
• kW on mains (utility) level
• Mains (utility) decoupling test mode
• Manual speed/frequency adjust
• ROCOF & vector shift
• Generator load demand
• Automatic hours run balancing
• Dead bus sensing
• Existing load share line interfacing
(P123 required)
• Direct governor & AVR
communication
• Volts & frequency matching
• kW and kVAr load sharing
• Manual voltage adjust
• Auto ID negotiation
BENEFITS
• Sends SMS messages to
engineers to notify specific
engine problems (GSM Modem
and SIM card required)
• On-site and remote (modem
required) module configuration
• In-built engine diagnostics
removes the requirement for
service equipment
• Full engine protection &
instrumentation without the need
for additional senders (Electronic
engines only)
• Remote monitoring of the module
using comprehensive DSE PC
software
• License free PC software