China Glossy Ral 3020 Red Color Epoxy Powder Coating Indoor Basket

Product DetailsTypeGlossy Ral 3020 Red Color Epoxy Powder Coating Indoor BasketColorRAL3020 RedSurface FinishSmoothGloss level 80%±5%Particle SizeAverage 32-42μmSpecific Gravity1.2-1.7g per cubic meterCoverage6-8 square meters per Kg at 30-90 μm film thicknessfilm thickness60-80umApplication RecommendationApplication Voltage60-90 KVGun to Component Distance15-30CMCuring Temperature200ºC x 10minPowder coated Film Mechanical PropertiesAdhesionCross-cut(2mm),no loss of adhesionImpact ResistanceDirect impact 50kg/cmPencil Hardness2HCupping Test6mm MandrelBending Test5mmPowder Coated Film Chemical ResistanceSalt Spray Test5% NaCl Solution for 500 hours - No changeAcid Resistance5% HCL for 48 hours dip test - No changeAlkali Resistance5% NaOH for 48 hours dip test - No changeStorage StabilityStore in ventilated, dry, clean room, temperature < 25ºCRelative humidity 50-65%Away from direct sunlight, fire, heatFor best performance, use within 6 months

The series that we can offer:

Gloss1. high gloss(above 80%), semi gloss(40-79%), matt gloss(5-39%) and no gloss(below 10°)
2. Gloss and texture can be customized as clients requireCuring Condition1. Standard curing (200ºCx10min)
2. Lower temperature curing (180ºCx15min)Color1. RAL & Pantone Colors are available
2. Colors can be customized as clients requireStandardSpecial standards of product are available according to clients' requirements, e.g.RoHS standard, EN-71, FDA, LFGB, etc.PropertyExcellent physical performance in hardness, flexibility and adhesion.. Good mechanical properties, outstanding heat resistance, fine corrosion, weather and chemical resistance.Storage1. The product can be stably stored for at least half year when kept in closed containers in a dry place at temperature below 25°C.
2. Keep it away from fire, heat and direct sunlight.
3. Avoid rains and exposure to sunshine during shipment.

Production Process
1. Mixing the raw materials
2. Stiring
3. Extruding
4. Cooling
5. Mincing
6. Grinding
7. Packing
8. Loading
Our Factories
1. Production workshop set up in 1989, leading powder coating supplier with rich experience in China.
2. Four factories in total. Three are Powder Coating Production base, one is Nano-Dryplatng Spraying base.
3. 16 Production Lines. 5 Bonding Lines. 9 Sample Lines.
4. Annual Capacity reaches 10,000 Tons.
5. Nano-Dryplating Silver Chrome Effect Powder Coating is identified as Guangdong High-Tech Product.
6. Oversea Countries: Sweden, America, Turkey, Russia, Guatemala, Peru, Pakistan, UAE, Vietnam, Sri Lanka, etc,
7. Native Cooperative Clients: MEDIA, GREE, KELON, DAYANG.
Why Choose Us?
1. Quatlity Control. 24 cabins to keep sample powder of each batch production. The quality can be traced within 2 years if any problem occurs.
2. Various Products. Thousands of colors. Nano Dray-Plating Colors. metallic Silver Gold Effects. Special sand, wrinkle, hammer vein texture.
3. Technical Support. Advice on coating line setup, integrated solution on coating. Professional production tracking, punctual delivery. Quality tracking system. Regular follow-up.
FAQ
Q1. Can I have a sample order for powder coating?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 3-5 days, mass production time needs 1-2 weeks for inspection and customs declaration.
Q3. Do you have any MOQ limit for powder coating?
A: Low MOQ, 1-2kg sample powder checking is available.
Q4. How to proceed an order for powder coating?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q5: Do you offer guarantee for the products?
A: Yes, we offer professional after-sale service for every customer.