China Glowing Granules G-PA-21041902

High elastic glowing rubber granules

Main ingredients Modified long afterglow luminous powder, weather-resistant rubber, etc.

Product indicators Afterglow time: more than 10 hours!

Material: Rubber

Particles: 3-4mm or 1-3mm

The amount of silver aluminate luminous powder (high brightness powder): 50%

Luminous color: yellow-green or blue-green

Density (cm3): 1.3~1.5

Afterglow height:

Excitation at 10min>1200mcd/m²,

60min excitation >170mcd/m.

Luminous performance: (test standard DIN67510-1): D65 standard light source 1000LX, excitation 10min

1. Wear resistance, weather resistance, stain resistance, acid and alkali resistance.

2. Good luminous effect, can replace weak current and low lighting.

3. Easy to use, no odor, more environmentally friendly.

Scope of application

Mainly used in ground marking, luminous signs on municipal roads, fire-fighting passages in workshops and garages, and various runway courts. Park community fitness path! Garden landscape, trail corridors, cavern air defense, fire guidance and other fields. Construction steps

Close the construction area to ensure the safety of the construction site.

Clean up the dust and oil on the base surface, repair the damaged parts, and keep the base surface flat. The ground needs to be dry! The luminous pattern is used to make luminous particles about 3.5 kg per square, and the glue ratio is one to eight!

If you do a little bit of luminous embellishment, you only need about 0.07 kilograms of luminous particles per square, just throw it in at the same time as the basic construction and smooth it out!

Precautions

The luminous particles must be stirred with yellowing-resistant glue to avoid glazing of the yellowing luminous particles! After 48 hours, the construction area can be released.

Packing specification

25kg/bag

Storage instructions

Storage conditions: Store at room temperature. Avoid sun and rain, and keep away from high temperature. Shelf life: 120 months!

The high elastic energy storage luminescent particles (special for plastic runway) produced by our company, the customer feedback after use is as follows:

Compared with the luminous pavement paved with luminous stone and the luminous pavement mixed with luminous powder, it has the following advantages,

1: Higher brightness!

2: The glow time is longer!

3: No yellowing!

4: Simple maintenance!

5: Good flexibility!

6: The dosage is more economical! The cost is reduced by more than half!

7: The luminous stone is mixed with the plastic particles. The luminous stone has corners and will pierce the glue plastic and drop the particles! The luminous stone is larger than the major dosage!

8: Luminous powder mixed glue, easy to precipitate, difficult to apply, after a few days

It must turn yellow and lose its luminous effect!