Slurry Pumps, G12110 A05, Volute Liner manufacturer / supplier in China, offering 14/12 St-Ah Slurry Pump Volute Liner (G12110 A05), Electric Slurry Mud Sludge Trash Pump (2PN /3 PN /4 PN), Carbon Steel / Stainless Steel Discharge Flange Pipe for Pump and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Piece | US $1411.00/ Piece |
Local Area: | Huaan, Jiangsu, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, PayPal |
Max.Head: | 50-80m |
---|---|
Max.Capacity: | >400 L/min |
Driving Type: | Motor |
Gold Mine Slurry Pumps for mineral processing
DescritionValueProducts NameHorizontal Slurry PumpDischarge Size1 - 18 inchFlow (m3/h)12.6-5400m3/hHead (m)6-118mMax Power(kw)1200kwMaterialHigh Chrome A05, Cr27- Cr 30%, Rubber R55, R33 etc. Drive TypeCV / ZVz/ CRz/ DCz/CLDrived EngineMotor or DieselSeal TypePacking Seal, Expeller Seal, Mechanical Seal,Dyna Seal MQQ1 setPayment TermTT, LC, or NegotiateOriginalShiJiaZhuang, Hebei ChinaSupply RangeSlurry Pump, Motor, base Plate, Guard, V-belt, PulleyWeight--Delivery TermBy Sea, By air, By TNT, DHL, By Train
LINERSIMPELLERSCASINGbaseEXPELLEREXPELLER RINGSHAFT SLEEVESEALSStandardChrome Alloy
Natural RubberChrome Alloy
Natural RubberSG IronSG IronChrome Alloy
or
SG IronChrome Alloy
or
SG IronSG IronRubber
and
NitrileOptionsFerralium
Hastelloy C
316 SS
W151
Polyurethane
Neoprene
Butyl
Viton
Nitrile
EPDM
HypalonFerralium
Hastelloy C
316 SS
W151
Polyurethane
Neoprene
Butyl
Nitrile
HypalonSG Iron
Various gradesMS
Fabricated
Cast IronNI Resist
Ferralium
Hastelloy C
Polyurethane
316 SS
W151NI Resist
Ferralium
Hastelloy C
316 SS
Rubber
W151
Polyurethane
Neoprene
Butyl
NitrileEN56C
Ferralium
Hastelloy C
Titanium
316 SS
304 SSCeramic
Stellite
Chrome Oxide
Nordel
Neoprene
Viton
TypeAllowable Mating Max.Power(Kw)Clear Water PerformanceImpellerCapacity/Q m³/hrHead/mSpeed/rpmMax Efficiency/%NPSH/mNos of VaneImpeller Diameter/mm1.5/1NAH1512.6--28.86--681200--3800402--451522/1.5NAH1532.4--726--581200--3200453.5--851843/2NAH3039.6--86.412--641300--2700554--652144/3NAH3086.4--1989--521000--2200714--652456/4NAH60162--36012--56800--1550655--853658/6NAH300360--82810--61500--1140722--9551010/8NAH560612--136811--61400--850714--10568612/10NAH560936--19807--68300--800826576214/12NAH5601260--277213--63300--600773--10596516/14NAH12001368--306011--63250--550794--105106720/18NAH12002520--540013--57200--400855--1051370
Parts Material
Spare part NameMaterialSpecificationHRCApplicationOEM Code
Liners&Impellers
Hard metalHigh Chrome White Iron 23-30%≥56Used for higher wear conditions with pH Between 5 to 12. A0515/3Chrome/Moly Iron≥59With moderate erosion resistanceA07ULTRACHROME 28% Cr, Low C43Used for FGD and other corrosive applicationA49
RubberStandard Impeller Rubber Used for superior erosive resistance requiredR08Standard liner Rubber Have superior erosion resistanceR26Natural Rubber- Reinforced Sufficient wear lifeR33Nature Rubber Cut resistance to hard, sharp slurriesR55Expeller & Expeller RingmetalULTRACHROME 27%Cr≥56Used for higher wear conditions with pH Between 5 to 12. A05Grey Iron High physical strengthG01Stuffing BoxmetalULTRACHROME 27%Cr A05Grey Iron G01frame/cover plate
Bearing Housing& base
metalGrey Iron G01Ductile Iron D21ShaftmetalCarbon steel E05Shaft Sleeve
Lantern Ring/ Restrictor
Neck Ring/ Gland Bolt
Stainless Steel4Cr13 C21304ss C22316ss C23Joint Rings & Seals
RubberButyl Rubber S21EPDM Rubber S01Nitrile S10Hypalon S31Neoprene S11/S42Viton S50
Faults Reason Settlement1.Pump fails to discharge any water,The hand of pressure gauge beat violently 1.Suction pipe don't have enough water.
2.Suction pipe blocked or the valve is locked.1. Inject enough water
2.unlock the inlet valve,clear the blocks
3.Exclude the air leakage 2.The pump can't discharge water,the hand of vacuum meter beat heavily. 1.The inlet valve is unlocked or silted up.
2.The resistance of suction pipe is too big or silted up.
3.The height of suction is too high. 1.Unlock the valve or desilting
2.improve the design of suction pipe or desilt
3.Lower the height of the installation.3.The pump can't discharge water,pressure gauge shows heavy pressure.1.The resistance of the discharge pipe is too big.
2.The impeller blocked
3.The speed is slow.1.Check and adjust the outlet pipe.
2.Clear the impeller
3. Improve the speed.4.The pump doesn't rotate The volute is silted up by the blocks. Clear the blocks5.The capacity is not enough 1.The blocks of the impeller or the inlet or outlet pipe.
2.The abrasion of the impeller is heavily.
3.The speed is low to normal
4.Pump is installed unreasonably or the leakage of the inlet pipe.
5.The transporting height is too high,the loss of the resistance of the inside pipe are too big.
6.The inlet valve not open enough or blocked
7.The packing seal leaks1.Clear the impeller or pipe.
2.Change the impeller
3.Adjust the speed
4.Install again or stop leaking.
Decrease the height of the transport or reduce the resistance.Unlock the inlet valve Compress the packing tightly6.The motor of the pump is overloaded 1.The head of the pump exceeds the head of the working condition.
2.Not consider the slurry density when selecting the pump.
3.The packing press tightly1.Turn down the outlet valve,cut the impeller or lower the speed.
2.Select the motor again.
3.Adjust the the screw of the packing gland 7.Abnormal sound in the pump, and no water out1.The resistance of the inlet pipe is too big.
2.The height of the suction is too high.
3.Cavitation occurred there is air in the inletThe temperature of the liquid is too highClear the suction pipe and sluice valve.Lower the height of the suction Adjust the water valve and let the pump operate in the defined limits.Block the leakage.Lowering the liquid temperature.8.pump vibrates1.pump cavitate
2.The block of the impeller single vane
3.The no concentricity between the pump shaft and motor shaft
4.Fasteners or foundation loose1.Adjust the water valve ,lower the height of the installation,reduce the resistance of the inlet.
2.Clear the impeller
3.Alignment again
4.Fasten the screw,and reinforce the foundation.9.Bearing is overheat 1.lock the cooling water
2.lubrication is not good.
3.the lubrication oil is not clear
4.the wrong direction of the thrust bearing.
5.there is something wrong with the bearing.Open the cooling waterAdjust the oil quantity Clear the shaft,change oilAccording to the inlet pressure,adjust the direction of the thrust bearing.Change the bearing 10.Packing short life The material of packing is not good Change the packing 11.pump leak oil1.High oil level
2.The rubber parts invalid
3.Assembly problem1.Lower the oil level
2.Change rubber spares
3.Adjust the assembly
12 Pump head leaking 1.The rubber parts not press wellAssembly again or press tightly