High quality130Ton Rough Terrain Crane QRY130 with CE and Ghost Certificate
Main Features:
1. Cummins ISDE230-30 Diesel Engine (169kW)
2. Overall dimension: 16500*3800*4000(mm)
3. Max. total rated lifting load: 130t
4. Min. rated working radius: 3m
5. Max. lifting height (Fully-extended boom+Jib): 40m
6. Max. grade ability: 55%
7. Dead weight in travel state: 88300Kg
Technical Paramters
CategoryItemsUnitsParametersOutline Dimension ParametersOverall lengthmm16500Overall widthmm3800Overall heightmm4150Axle basemm4900Tread mm2805Weight ParametersDead weight in travel stateKg88300Axle weightFront axleKg42500Rear axle Kg45800Power ParametersEngine rated powerKw (r/min)228/2100Engine rated torqueN.m (r/min)1200/1000-1500Engine rated rotating speedr/min2100Travel ParametersTravel speedMax. travel speedKm/h39Min. stable travel speedKm/h2Turning radiusMin. turning radiusm9.5Min. ground clearance mm600Approach angle °19Departure angle°19Braking distance (at 30Km/h)m≤9Max. gradeability %50Technical Lifting Parameters
CategoryItemsUnitsParametersMain Performance ParametersMax. rated lifting load t130Min. rated working radiusm3Tuning radius at slewing table tailm5.35Max. load momentbase boomKN.m5200Fully-extended boom KN.m900Fully-extended boom + JibKN.m400Outrigger spanLongitudinal m8.7Lateral m8.2Lifting heightbase boom m14Fully-extended boomm51
Fully-extended boom + Jibm75Boom lengthbase boomm13.2Fully-extended boomm50
Fully-extended boom + Jibm72.5Jib installation angle°0,30Working Speed Parameters
Derricking timeBoom raising time s80Boom descending times75Telescopic timeBoom full-extended times280Boom fully-retracting times100Max. swing speedm/min2.0Outriggers telescopic timeHorizontal outriggersExtending synchronouslys30Retracting synchronouslys20Vertical outriggersExtending synchronouslys30Retracting synchronouslys20Hoisting speed of single rope (The wire rope is at the fourth layer)Main winchFull loadm/min80No load m/min100Auxiliary winchFull loadm/min85No loadm/min100
Notes: Explanations to Lifting Load
1) The rated lifting load value given in the table is the maximum lifting capacity when the crane is set on solid and level ground. The load should not exceed 75 % of the tip-over load;
2) The total rated lifting load given in the table includes the weight of hook and slings;
3) The working radius given in the table is the actual value including the deformation amount of the boom, so lifting operation should be carried out as per working radius.
4) 75 % of the tip-over load takes into account wind force 6, i.e. lifting operation still can be carried out with fully-extended outriggers when the wind pressure reaches 125N/m2, but lifting operation with tyres or traveling with load are prohibited.