China Good Quality Mining Coal Rock Limestone Hammer Crusher

Good Quality Mining Coal/ Rock/ Limestone Hammer Crusher
Good quality Mining Coal/ Rock/ Limestone Hammer Crusher
Hammer crusher use the impact force between high-speed rotating hammers and materials to do the break work.
Hammer crusher has the advantages of simple structure, large crushing ratio and high production efficiency etc. And can crush in dry & wet way. It is widely used in to crush the medium hardness and brittleness materials in mining, cement, coal, metallurgy, building materials, roads, fuel and other departments. The grate gap of hammer crusher can be adjusted to meet different particle size as requirements.
Structure:
Simple structure,
High reduction ration,
High efficiency, Low Cost
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.

Model
Rotor Size
(Diameterxlength )
( mm )
Rotor Speed
( r/min )
Feeding Size
( mm )
Output Size ( mm )
Motor power
( KW)
Capacity ( t/h )
Weight
( kg )
PC400x300
Φ400x300
1440
≤100
≤10
7.5
5-10
900
PC600x400
Φ600x400
960
≤100
≤15
18.5
10-20
1500
PC800x600
Φ800x600
970
≤120
≤15
45
18-24
2680
PC1000x800
Φ1000x800
990
≤200
≤15
110
30-50
5600
PC1000x1000
Φ1000x1000
990
≤200
≤15
132
30-60
8000
PC1200x1200
Φ1200x1200
750
≤250
≤20
180
90-110
19000