China Good Quality Woodworking Machinery Edge Banding Machine Rfb465j

Good Quality Woodworking Machinery edge banding machine Rfb465j. There are many
kinds of woodworking tool, edge bander, high speed banding machine, inclination
edgebander.
Functions of this series are followings, pre-milling, Gluing system, edge cutting sysytem,
press system, end trim system, fine trim system, conner trim system, scrapping, flat
scrapping, hogging, buffing.
Suitable for straight line edge banding. OEM and ODM are available.
PLC touch screen: Delta(Taiwan) Electric control element:Schneider
Frequency Converter:Shihlin(Taiwan) Pneumatic component:Mindman and Easun(taiwan)
Feeding motor and Gear Motor:Tung Lee or CPG(taiwan)
High Speed motor:HST(Taiwan)
Much popular in the America, North America and South America, Asia, Southeast
Asia, Europe, etc.The other sizes are woodworking bander RFB465,465F,465JC, 465JF,
465JH, RFB465JCF,RFB465JCH.
Function of wood edge banding machine, 465J,

465JPre-millingBand GluingEdge CuttingPressEnd TrimFine TrimScrapingBuffing

Parameter

ModelRFB465JPanel length≥120mmPanel width≥60mmPanel thickness10-60mmEdgeband thickness0.3-3mmFeeding speed13-22m/minIn-put voltage380V.In-put frequency50HZ.3PTotal power13KWRequired air pressure0.6MpaOverall dimensions(L*W*H)4900*900*1560mm

Function of automatic wood bander machine,465J
1.Pre-milling system
Pre-milling adopts double linear guide, with higher guidance accuracy and good motion stability,
pre-cutter Φ125mm H35mm six-tooth diamond pre-milling cutter, with high hardness and wear resistance,
longer service life.
2. Gluing system
In gluing system, the glue box is coated with Teflon, which makes the box cleaning easier. The glue box has
the temperature maintaining function and can shorten heating time and avoid the glue carbonization. The
machine can use the high temperature EVA hot melt glue and can deliver the glue by spiral structure.
The glue box size is 200*150*450mm.
3.Feeding and edge cutting system
When the single unit feeding system can be used to load the strip (optional) and roller type edge bands and
the edge band thickness can be 0.4~3mm. If the single work unit can not meet the working requirements,
the 2-10 feeding units can be selected. The edge cutting cylinder is controlled by double solenoid valves.
4. Press system
The precise large press wheel and glue wheel can work together to ensure the press effect. The small press
wheel are composed of 2 upper and lower cone wheels and 1 straight wheel. The upper and lower cone
wheels can ensure the good press effect. The large and small press wheels are controlled by the separate
pressure control valve.
Optional: One large wheel can be equipped with 5 small wheels.
5. End trimming system
Adopt the imported precision linear guider, the automatic profiling tracking and high frequency and high
speed motor of 0.37kw to ensure the smooth cut surface.
6. Fine trimming system
Rough trimming motor is 0.75kw high frequency motor. The rough trimming tools are the Φ69mm four
tooth carbide cutters with high hardness and wear resistance. The tools processing angle is 45°.
Optional:High-power high-frequency motor 1.1kw.
7. Scrapping system
It is used for PVC or ABS edge band less than or equal to 3mm. The system adopts high steel structure.
Use knob to adjust the arc angle. Each group has two precise profile wheels to ensure the accuracy of
cutting point.
8.Buffing system:
The two independent motors equipped with buffing wheels are used for cleaning and buffing after edge
banding, easy to operate.
Optional: Pneumatic reciprocating buffing by motors.
10. Electric system
Each functional group is controlled by independent Delta inverter to ensure the co-movement of the system (except the buffing and lifting motor). All electric parts are from famous brand with CE to
ensure the long time operation of the machine.Use the Taiwan DELTA PLC control system to ensure high
stability and precision.

11. Control panel
The machine is equipped with DELTA touch screen, the human-computer control surface. The picture and words can directly reflect machine failures and solutions, which makes machine maintenance easier.

12.Pressure beam electric lifting system
The rising and falling function of the pressure beam can be started rapidly through the operation screen. The
separate position indicator can show the rising and falling height.
13. Automatic grease lubrication & Automatic oiling:
1.The oil filling structure is controlled by microcomputer and oil filling speed can be defined by the user.
The minimum oil amount alarm is set up.
2.The oil filling structure can add oil for the end trimming moving slider and conveyor guider within
set-up time. This can ensure the related parts be lubricated in time, reduce friction and prolong the service life.
3.The manual oil filling system for the pre-milling is used for the lubrication of up, down, front and back guide
rails to prevent service life and ensure work precision.

14. Air source processor (triplets)
15.CE optional component
1) Power break protection device
2) Central power switch
3) Protective casing over press roller
4) CE electrical components
Optional:
1.Misting station
A) Before pre-milling: Prevent the upper and lower surface from sticking with glue, improve the edge banding effect.
B) Before buffing: Improve the cleaning effect of the plate.

2.Pneumatic Tool Alignment System
1.Input the new thickness of edgeband,then it can change the edgeband automatically.
2.Position location of cylinder,work with 0.4-3mm edgeband.
3.The manual adjustment is no longer required. The worker only needs to place the corresponding edgebands
at the entrainment position. Easy to operate.

3.Hot air blowers
Brings high gloss shine back to PVC banding after the 3mm scrape station.
Blow after the scrape station, make buffing effect better.
4.Endplay buffing
Control the buffing wheel movement by pneumatic control, prolong buffing wheel service life and improve
buffing effect.
5.Caterpillar type pressure beam
Adopt the double-peak caterpillar pressure with high stability. It has large press contact surface and good pressure positioning effect. The belt contacts with wood piece surface can ensure the good pressure
of panels with different lengths.
6.Automatic feeding system
Realize edge band feeding by control the press wheels by pneumatic control.
7.Fast glue heating
The upper glue box can decrease the gluecarbonization.The fast glue heating system can sense
automatically and heat continuously. It can realize fast glue heating and supply glue continuously.
.
8.Multi-edge band holder
based on different processing requirements, 2 to 10 different edge bands can be changed automatically.
When edge band is used up, the machine will show alarm automatically.
9.Dust collection manifold for scraping system.
Catch the wast sawdust caused by scraping.Clean and easy.

10.PUR Gluing system
Our Factory
Samach'S Services and dominant:
1: Professional team of techniques study and research, guarantee the Machine latest and improving efficiency.
2.Knowing China and world markets well, offer professional soluttions.
3.Fast market reaction, guarantee our partners always in front edge.
4.Supeiror Guarantees,quality of our machine and sell-after service.
5.OEM/ODM are available.
6.Principle: One cooperation, forever partners.