China Greenpedel 48V 1000W 1000 Watt Kit Electric Bike Germany

Green Pedel 48V 1000W electric bike brushless gearless hub motor kit
Motor

MOTOR PARAMETER

Rated Voltage (V)

48

Cable Location

Shaft center right

Rated Power (W)

1000

Spoke Specification

12g/13g

Wheel Size

20--28

Hall Sensor

Optional

Rated Speed (km/h)

42-50

Integrate speed sensor

Optional

Rated Efficiency (%)

>=83

Surface

Black

Reduction Ratio

Brake Type

V/Disc brake

Weight (Kg)

6

Salt fog test (h)

24/96

Open Size (mm)

100/135-142

Noise (db)

< 55db

Drive and Freewheel

6-9s

Waterproof Grade

IP54

Motor

GreenPedel 48v 1000w electric bike gearless hub motor conversion kit (Model : GP-D30)

1. Brushless Gearless hub motor

2. Spoked with double-wall Aluminum rim 20-28"

3. V Brake/ Disc brake available

4. Rated speed=42-50KM/H.

5. Load≤150KG

6. Motor cable with waterproof connector or Anderson PP30 Connector.

Charger

AC 100V -240V 2amps smart charger

Controller

48V/30A- intelligent brushless controller,low voltage protection =42V

PAS

1:1 intelligent pedal assistant system.(8 points magnet)

Throttle

Thumb throttle/Twist throttle for option

Display

LCD Display for option

Braking

E-brakes levers OR E-brake sensor for motor power cut off.

Wiring

Waterproof harness or regular connection(Bullet/PP30 for motor and JST/DJ2.8 for other electric parts)

1) Installation Width: Front=100mm,Rear=135-142mm
2) Color black or silver choose by random.
3) The max speed of the motor will be 42-50KPH.
4) The size of the rim is 20",24",26" or 700C(28inch) .Please confirm the size in advance.
Our Motor advantage:
1,Most factories in the market choose the straight magnet to save
cost. But,we use the bent magnet to make motor high-quality and more powerful.
2,Magnetic steel:Bending magnets, magnets height 30H,magnetsngrade 38H,magnetic flux >3.0
3,Hall sensor board
Accessories:
Controller
1) We have waterproof controller and standard controller for option
2) We have Blueth + App controller or standard controller for option
3) We have controller box and controller bag for reservation
4) We have normal controller or controller made in the battery holder for option,but 9 better powered mosfet is the limit.
5) We have Square wave or Sine wave controller for option.(6 mosfet and 12 mosfet support sine wave)
For example,36V 14A controller,6 mosfet,48V 30A controller,12 mosfet (support sine wave)
Display Power switchBattery indicatorReal time showingRunning speed showingPAS speed changeContinued mileage showing

LED

1/ Nineteen-segment LED speed indicater, showing speed 0-40km/h(Deprecated the LED display used for the motor power more than 750W)

2/ 6km/h for option; head light switching for option
3/ 1-5 PAS level + four led battary capacity showing
4/ Parameter setting and copy interchangable with other KT LED or LCD
LCD

1/ Single trip time(TM)+total trip time(TTM) Real time km/h or MPH display
2/ Single Max speed(MXS)+single Average Speed(AVS)
3/ Single trip distance(DST)+Total Trip distance(ODO)
4/ 6km/h push funtion,Cruise function.head ligth,back lights, switching opitonal,brake status showing
5/ torque sensor imulation speed sensor 0-5 level+ battery capcity showing
6/ 24V,36V,48V compatiable.
7/ Controller can be reprogrammed by Parameter setting.
8/ Data clear+parameter copy+Fault code Disply.

Function of LED900s display:
1. Nineteen-segment LED speed indicater,showing speed 0-40km/h
2. 6km/h for opitional;head ligth switching opitonal;
3. 1-5 PAS level+Four LED battery capcity showing.
4. Parameter setting and copy.interchangable with other KT LED or LCD.
Function of LCD-5 display:
1. Single trip time(TM)+total trip time(TTM) Real time km/h or MPH display
2. Single Max speed(MXS)+single Average Speed(AVS)
3. Single trip distance(DST)+Total Trip distance(ODO)
4 . 6km/h push funtion,Cruise function.head ligth,back lights, switching opitonal,brake status showing
5. torque sensor imulation speed sensor 0-5 level+ battery capcity showing
6. 24V,36V,48V compatiable.
7. Controller can be reprogrammed by Parameter setting.
8. Data clear+parameter copy+Fault code Disply.
Function of LCD-3 display:
Basic fuction1-8 same as LCD1. Add 2 points as following,
9. Motor working power(W) showing. And motor working Temperature showing.
10. LCD Alarm for motor over heat. (USB function opitional)
Throttle
We have thumb throttle, twist throttle and half twist throttle for option
PAS (Pedal Assistant System)
We have 8 magnent PAS, 12 magnent PAS for option
(1) normal 8 magnet PAS,you will need to remove the braket when installing the parts in ebike
(2) Divided double hall12 magnet PAS,easy to install,no need to remove the bracket
(3) V12 (left/right is up to you),disc plate is biult in,sensitive and faster reponse.
5 levers for Pedal Assistant System.
Ebrake lever or ebrake sensor
We have high quality e brake lever, ordinary ebrake sensor and hydraulic ebrake sensor for option for Power cut off.
Battery:
1) We have Tube battery, Frog battery, Lift battery, Frog battery, Tigershark battery, Hailong battery and Rack battery for option
2)Our lithium battery capacity is usual from 8.8AH to 19.2AH
3) We have Chinese cell, Samsung cell, Panasonic cell and LG cell for option
For example:36V 250W motor,we suggest:36V 8.8Ah-12.8Ah






We can offer to you according to these information.
Packaging Details:
carton with foam;
16" packing size=45X45X25CM
20" packing size=50x50X25CM ;
24" packing size=55x55x25CM
26" packing size=60x60x25CM
28" packing size=65x65x25CM
Delivery Detail:
Shipped in 15 days after payment
Company information:
Changzhou Green pedel Co.,Ltd is a professional and scientific enterprise that specialises in researching, producing and selling electric bicycles,electric scooters, K-Shaped cars, Shilly-cars and conversion kits. We ensure the quality of the first-class production equipment and the international standard operating procedures, as well as the professional operating staff. We always uphold the priciples of "quality first , integrity first, and reputation first. " In the past 7 years, our customers vary from government to industrial organizations, from distributors to retailers.

FAQ:

Q1. What are your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q2. What are your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.

Q3. How about your delivery time?

A: Generally, it will take 10 to 15 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q4. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q5. How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit.
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Q6. about the warranty?
A:Warranty 3years for motor,2years for battery,1year for other accessories.

Contact US:
♥ If you have any question,please feel free to contact us. We will reply you within 12 hours.
Jack Jiang
Sales Manager

M:+86 13775615773


https://greenpedel.en.alibaba.com
Changzhou Green pedel Co.,Ltd
Add:NO.2188,LONGCITY ROAD,ZHONGLOU DISTRICT,CHANGZHOU CITY,CHINA