China Grewin High Performance High Accuracy Cable Fault Tester for Locating

Introduction
The PCLD-902P Digital Power Cable Fault Pin-pointer is an easy operation device used to pinpoint the fault point.It's matched with high voltage signal generator.
Fig.1 PCLD-902P
Design FeaturesAudio magnetic synchronous method,high anti-interference capabilityAudio and magnetic signal waveform display.Signal and noise is easy to distinguishCursor measurement of audio magnetic delay,accurately distance locatingRoute tracing while pinpointing according the initial polarity of magnetic waveformBuild-in High capacity lithium-ion battery and quick chargerHigh performance antinoise earphonePower supply management:power off automatically in 15 min. without action; Power off also when low battery voltage.Big LCD screen,user-friendly Solid housing case and easy to carryTech. Specifications

Audio magnetic synchronous pin-pointing:Audio signal transmission band Mid-frequence 400Hz ,bandwidth 200Hz.Gain of signal channel 80dBAccuracy of pin-pointing 0.1mPower supply:Battery built-in Li-ion battery pack, nominal voltage 7.4V,Capacity 3000mAHPower consumption 300mA ,works more than 9 hoursCharger Input AC220±10, 50Hz; output 8.4V, DC 1ACharge time More than 4 hoursOtherDisplay 320*240 LCDVolume 270*150*210mmWeight 1.5kgsWork condition -10ºC-40ºC
Humidity5-90%RH
Elevation:<4500m

Physical Characteristics
PCLD-902P Digital Power Cable Fault Pin-pointer
Standard configuration:
Main unit
One sensors
High performance antinoise earphone
ChargerMain unit panelDetails as Fig.2
Fig.2 Main unit front panel
Details:LCD screen:Display device and testing informations. Press 2 sec. to turn on/off the devicePress to turn on/off the backlightPause:Press to pause the magnetic synchronous trigger for waveform checking.Press again to recover. Move the cursor Mag.gain+/-: change the gain of synchronous magnetic signal Audio gain+/-:Adjust the audio signal gain when distance locating and pinpointing Sync.:flash one time when magnetic triggerCharge port:charge for the build-in batteryEarphone port:Voice monitor when pinpointing
Sensor:Connect with audio magnetic synchronous pinpointing sensor

Company introduction
Certificate:

Contact:
Grewin.Beyond
Tianjin Grewin Technology Co.,Ltd.
Web:www.grewin-tech.com