China Gwc-B-500*2 Acl Wall Panel Production Line

GWC-B-500x2 Autoclaved Aerated Concrete Slab Mesh Welding Production Line
Main Technical Parameters:
Power supply
380V 50Hz
Number of power phases
Three phase four cable
Duration rate
20%
Air source pressure
0.6-0.8MPa
Coolant flow
40-60L/min
Coolant temperature
≤30ºC
Maximum welding capacity
Φ6mm+Φ8mm
Interval of main bar
50mm (increase by every 50mm)
Interval of cross bar
≥25mm stepless adjustable
Diameter of steel bar
Main bar: Φ4-8mm; Cross bar: Φ4-6mm
Feeding mode
Main bar: auto; Cross bar: pre-cut
Maximum welding velocity
95 rows/min (interval: 50)
Rated power
4x150KVA

Features:
1. With high production efficiency, two meshes can be welded simultaneously.
2. The complete welder is controlled by human-machine interface and PLC programming controller, with high degree of automation.
3. This welder can be used to weld many materials with wide adaptability, such as hot-rolled ribbed bar, cold-rolled ribbed bar, hot-rolled plain bar, cold-rolled plain bar and so on.
4. One or time-based welding is adopted with great flexibility according to user's electric capacity.
5. The machine set is designed with a discerptible structure in order for specification adjustment and maintenance.
6. Welding systems, such as transformer, upper and lower electrodes of controllable silicon and so on, are cooled forcibly by water and equipped with a flow protection device so that the machine set works reliably and continuously.
7. Stepless adjustable pneumatic welding system pressure can fast respond any change of steel bar specifications.
8. Welding pressure is uniform and accordant to ensure the quality of all welding spots.
9. The unique lifting mechanism can break away from the electrode during dragging meshes to ensure the service lifetime of electrode and reduce the operation expense.
10. Furring strips blanking device adopts a stepping motor for automatic feeding to relieve the labor intensity and improve the efficiency.
11. imported digital servo motor system can ensure the accuracy of mesh size.
12. Longitudinal mesh size can be changed by screen input to adapt to any change of multi-specification engineering meshes.
13. A magnetic swinging mechanism is equipped at the blanking place of furring strips in order for fast blanking speed and high production efficiency.
14. An in-situ device is equipped at the electrode to ensure the reliable and accurate blanking of furring strips.
15. The unique design is favorable to conveniently, flexibly and fast replace steel bars and steel meshes.