China Gwc-C-500*2 Autoclaved Aerated Concrete Slab Mesh Welding Production Line

GWC-C-500x2 Autoclaved Aerated Concrete Slab Mesh Welding Production Line

Main Technical Parameters:
Power supply
380V 50Hz
Number of power phases
Three phase and four wire
Load duration rate
20%
Air source pressure
0.6-0.8MPa
Cooling liquid flow
40-60L/min
Cooling liquid temperature
≤30ºC
Maximum welding capacity
Φ6+Φ8
Interval of longitudinal bars
50mm (50 increasing)
Interval of furring strips
≥25mm stepless adjustable
Diameter of steel bar
Φ6-Φ8 (longitudinal bar: 4-8mm, furring strips: 4-6mm round steel or twisted steel)
Feeding mode
Longitudinal bar: preform; furring strips: vertical stripe
Unloading mode
Unloaded by unloading machine
Maximum welding velocity
95 rows/min (interval: 50)
Rated power
4 x150KVA
Features:
1. With high production efficiency, two meshes can be welded simultaneously;
2. The complete welder is controlled by human-machine interface and PLC programming controller, with high degree of automation;
3. This welder can be used to weld many materials with wide adaptability, such as hot-rolled ribbed bar, cold-rolled ribbed bar, hot-rolled plain bar, cold-rolled plain bar and so on;
4. One or time-based welding is adopted with great flexibility according to user's electric capacity;
5. The machine set is designed with a discerptible structure in order for specification adjustment and maintenance;
6. Welding systems, such as transformer, upper and lower electrodes of controllable silicon and so on, are cooled forcibly by water and equipped with a flow protection device so that the machine set works reliably and continuously;
7. Stepless adjustable pneumatic welding system pressure can fast respond any change of steel bar specifications;
8. Welding pressure is uniform and accordant to ensure the quality of all welding spots;
9. Longitudinal bars are straightened by round preforms through straightening mechanism without straightening device otherwise equipped;
10. The unique lifting mechanism can break away from the electrode during dragging meshes to ensure the service lifetime of electrode and reduce the operation expense;
11. Furring strips blanking device adopts a stepping motor for automatic feeding to relieve the labor intensity and improve the efficiency;
12. imported digital servo motor system can ensure the accuracy of mesh size;
13. Longitudinal mesh size can be changed by screen input to adapt to any change of multi-specification engineering meshes;
14. A magnetic swinging mechanism is equipped at the blanking place of furring strips in order for fast blanking speed and high production efficiency;
15. An in-situ device is equipped at the electrode to ensure the reliable and accurate blanking of furring strips;
16. The unique design is favorable to conveniently, flexibly and fast replace steel bars and steel meshes;