China Gy200 All Sizes Used Tire Cutting Machine for Waste Tyre Recycling

The machine is to be used for raw rubber cracking and scrip rubber cracking in rubber reclaim industry.

A- This is a double roll rubber cracker machine. It consists of motor, gear-down reducer, driving gears, speed-ratio gears, front and back rolls, bearings, frame, cover, bed plate, adjusting pin device, emergency stop device, roll temperature adjusting device, lubricating device and material plate, etc.

B- Front and back rolls are parallel mounted in the bearing of frame. By means of reducer, driving gears, speed ratio gears, the motor drives the front and back rolls rotate toward each other so that rubber-cracking is begun. The rolls are made from chilled cast alloy iron; the inner of it is hollow.

C- Steam and cooling water can pass through them so that the surface temperature can be adjusted. Its surface possesses higher hardness and fineness.

D- Roller bearing, copper bushing is fixed in the bearing base of frame. Back roll bearing bases are fixed up on frame, and the front roll-bearing base can slide in the guide-rail of frame.

E- Roll spacing adjusting is carried out by means of the reverse of hand wheel makes the thread rod drive front bearing base movement. The roll pin reduces when the hand wheel rotates clockwise, otherwise it will increase.

F- The emergency stopping device is mounted in the frame. In abnormal situation, pulling the rod, via dynamic, the machine is stopped immediately.

G- Adjusting temperature device is two spray pipes with numeral rows of holes, extend the two pipes into the hollow roll, the holes are in the position of working section of the roll. The position of holes slants to 30 degree inner direction so that the spraying water and steam is directed at contacting angle of sizing material, this can control the surface temperature of roll.

1.Ring cutter

This machine mainly used to cut the sidewall of steel wire tire ,and then to the next step of segmentation .First, put the tire on the platform, then rotate the hand wheel , the three claws will stick the inner tire firmly ,Second ,Starting power,work platform will rotation ,cutting tool according to need to cut tire slowly step by step . until the tire side cut off.

Item

Specification

Ring cutter

motor power

5.5

Speed of main screw

46.8 r/min

Max Diameter of tyre

1200mm

Dimension

1100*900*1700

2.Strips cutter

strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips ,and the width of the adjustable section .Two circular knives for special materials ,hard and durable , can be used repeatedly grinding for no more than 1200 steel tires

Item

Parameter

Strips cutter

Motor Power

5.5kw

Disc Diameter

380mm

Rotate Speed

18.4r/min

Dimension

1290*870*1550

3.Block cutter

Block cutter is designed to cut car, truck and rear tractor tire. range is up to 120cm truck tires. the tire cutter adds flexibility to your total tire cutting system by providing you the opportunities of accepting tires up to 120cm into your system ,The unit also allows your system to cut 60-70 truck tires per hour or 120-150 car tires per hour.

Item

Specification

Block cutter

motor power

11kw

Speed of main screw

420 r/min

Out diameter of cutter

200mm

Dimension

1130*830*1100

4.Bead wire separation

Be utilized to separate rubber and steel wire of bead in order to get whole steel wire .

Feature:It is easy operation ,easy to be installed and maintained high efficiency and clean etc.

Item

Specification

Bead wire separation

Motor power

15 KW

Linear speed of front roller

15.5 m/min

Ratio of speed

1.1

Dimension

1520*1150*12101mm

5.Tyre crusher

This machine is mainly used to crush waste tire and rubber .the structure is gear transmission

Parameters/version

XKP-400

XKP-450

XKP-560

Front roll diameter

400

450

560

Back roll diameter

400

450

510

Roll length

600

650

800

Front roll surface speed (m/min)

17.32

23.2

25.56

Friction ratio

1:1.38

1:1.38

1:1.30

Max. nip

8

8

8

Feeding capacity per (kg)

200-300

600-800

1500

Power(kw)

45

60

75

Size(l*w*h)

3950*1800*1780

4770*1846*1835

5064*2284*1978

Weight(kg)

7000

12000

19000

6. Selection and transportation system