China Gzr-1200 Automatic Hv Winding Machine

GZR-1200 Automatic HV winding machine
1.Equipment name
GZR-1200 Automatic HV winding machine
2.General introduction
GZR-1200 Automatic HV winding machine applies to manufacture of windings for various types of small and medium distribution transformer., current transformer and reactor etc.
It consists of winder, automatic wire pitch setter, layer insulation feeder, Round wire and flat wire tension adjustable feeder, pneumatic system, PLC control ,servo system,touch screen man - machine interface and so on.. Having the advantages of high automaticity, complete functions, strong power etc. and ensures the axial and radial tightness and also for manufacturing square coil.
3.Performance specification
3.1 Center height 850 mm
3.2 Center distance of spindle Max1200 mm
3.3 Working torqueMax 200 N/M
3.4 Working speed0-300 rpm
3.5 Mode of speed control Stepless frequency control
3.6 Used winding parameters:
Outside diameter (O.D.) ≤600mm
Rectangular coil diagonal length. ≤600mm
Coil height: H≤1200mm
Weight of work piece: Max 500kg
3.7 Total Powerabout 6 kw
3.8 Max. Set turns9999.9
3.9 Conductor specification
Flat wire: Max 3x12mm
Enamelled wire: Φ0.3mm-Φ3mm
3.10 Automatic wire pitch setter Can set minimum wire pitch of 0.01 mm
3.11 Counting mode
5-digital display, can set total turns and set turns in 20 times, reverse counting available, no loosing data in the event of power-off.
3.12 Power supply 380v/50HZ
3.13 Color International green
3.14 Total Weight about 2100kg
3.15 Length of the main sizeabout 2800*1400*1400mm
Working area about 6000*2800*1400mm
4.Functional characteristics
4.1. The machine adopts hard fabrics gear mechanical transmission
system, high efficiency,low noise.
4.2 .The motor with brake function, sensitive and reliable.
4.3 .Used on electrical frequency control of motor speed and braking is controlled by inverter, thus starting, braking and the slope can be preset to apply winding groove.
4.4 .Frequency control of motor speed range, control of motor speed accurately, stability;
4.5.With function of automatic winding .
4.6 .Adopt servo motor and PLC control system, high-definition touch panel screen display and man-machine conversation, adopt imported ball screw transmission and linear guide rails meet the line accurately.
4.7 .Set up dedicated line,Synchronize the ribbon cable and winding automatically
4.8 .Winding former according to different wire gauge, convenient set
automatic thread pitch. In the winding process, the possible error can be
manual fine-tuning, ensure that the coil tightly.
4.9 .Desktop control box placed in the above case, easy to use, display and clear.

4.10 .Equipped with a square shaft (90 x 50 mm) is a hollow shaft.