Surge Protector, Lightning Arrester, Signal SPD manufacturer / supplier in China, offering 1000Mbps RJ45 Gigabit Poe Outdoor Lightning Protector, 100Mbps RJ45 Data Cat5 Single Channel Network SPD Surge Protector, Power Surge Protector Box/SPD Box/Instrument Protection Box and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Tilt / Zoo | US $99.00/ Tilt / Zoo |
Local Area: | Shenzhen, Guangdong, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, PayPal |
Technology: | Pan / Tilt / Zoom |
---|---|
Style: | Bullet Camera |
Type: | CCTV Camera |
Model SV-SDI/16Nominal operating voltage 12VNominal discharge current (8/20μs)3KAMaximum discharge current (8/20μs)5KAProtection level (8/20μs,3KA)≤20VResponse time ≤1nsTransmission rate1.485GInsertion loss≤0.5dBProtection route16Dimension 482x86x44mmConnector typeBNCWeight 1465gMounting typeRack mountHousing materialAluminum Index of protection IP20Operating environmentTemperature:-40-+85ºC humidity: ≤95%warrantyFive-year warranty, three-year replacementRelated itemsSV-SDI, SV-BNC/4, SV-SDI/8, SV-BNC/8 etc
INSTALLATION AND MAINTENANCE
The SPD should be connected in series between the protected device and the signal/power transmission channel.
The input terminal (IN) of the SPD should connect to the signal/power transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
Connect earthing wire of the SPD to earthing bus-bar of the lightning protection system of the room or building.
No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately.