China HDPE Pipe Extrusion Production Line

Advantages of PE pipe extruding line:
connection reliability: polyethylene pipe system connected between the use of electric hotmelt, the joint strength is
higher than pipe body strength.
good low temperature impact resistance: lowtemperature brittleness of polyethylene low temperature can be within
a temperature range of subzero 60 to 60 degrees Celsius safe to use. Construction in winter, because of materials,
impact resistance is good, tube embrittlement will not occur.
good stress cracking resistance: HDPE has a low gap sensitivity, high shear strength and excellent anti scratch
capabilities, resistance to environmental stress cracking performance is also very prominent.
good resistance to chemical corrosion: HDPE pipe can be resistant to a variety of chemical media, corrosion,
chemical substances that exist in the soil will not cause any degradation of the pipeline. Polyethylene is the electrical
insulator, it will not happen rot, rust or electrochemical corrosion phenomenon; In addition, it will not promote algae,
bacteria or fungal growth.
anti aging, long life: containing 2% to 2.5% of the uniform distribution of carbon black in polyethylene pipe can be
outdoor storage or use of 50 years, will not be subjected to ultraviolet radiation damage.
abrasion resistance: HDPE Pipe and comparison tests showed the wear resistance of steel pipe, HDPE pipe 4 times
the wear resistance of steel pipe. In the mud transportation field, as compared with the steel pipe, HDPE pipe has
better wear resistance, which means that HDPE pipe has a longer life and better economy.
flexible good: HDPE pipe flexible makes it easy to bend, works by changing the pipes can be a way to bypass the
obstacles towards, and in many occasions, the flexible pipe fittings to reduce consumption and lower installation
costs
flow resistance: HDPE pipe has a smooth inner surface, the Manning coefficient of 0.009. The performance smooth
and non adhesion properties ensure the HDPE pipe has a higher than traditional pipe transmission capacity, but also
reduce the pipeline pressure loss and water consumption.

Model number
PE-16/63
PE-20/110
PE-50/160
PE-75/250
PE-110/315
PE-200/450
PE-315/630
PE-400/800
Pipe diameter
16-63mm
20-110mm
50-160mm
75-250mm
110-315mm
200-450mm
315-630mm
400-800mm
Max output
150kg/h
200kg/h
350kg/h
350kg/h
350kg/h
450kg/h
850kg/h
850kg/h
Production rate
1-15m/min
1.2-12m/min
0.6-8m/min
0.5-4m/min
0.4-3.7m/min
0.3-3m/min
0.2-2m/min
0.1-1 m/min
Extruder model
SJ-65/30
SJ-65/33
SJ-75/33
SJ-75/33
SJ-75/33
SJ-90/33
SJ-120/33
SJ-120/33
Installed power
85kw
110kw
125kw
180kw
260kw
325kw
480kw
600kw
Center height
1000mm
1000mm
1000mm
1000mm
1100mm
1100mm
1200mm
1300
Installation area
35x3.0x2.0m
38*3.1*2.2m
38*3.1*2.2m
40*3.2*2.4m
42*3.2*2.4m
52*3.3*2.6 m
60*3.5*2.8m
68*3.6*3.0m