China HHeld Metal Detector Md150

High quality Hand Held metal Detector MD150

INTRODUCTION
It is a high performance Hand Held metal Detector
Designed to meet the exact requirements of the security industry.
Typical uses will include body search for offensive weapons in crowd
control, airport and border security, checking parcels and letters for
metal objects and anywhere that hidden metal needs to be detected.
OPERATION
1.It operates on one 9V standard or rechargeable battery. To install
the battery, slide off the battery cover and place the battery into its
compartment while matching the +/- symbols.
2.Turn the unit on by pushing the on/off switch until it clicks on and
the greed LED is lit. The detector is now operational although an
increase in sensitivity and depth range can be achieved by turning
the sensitivity adjuster anti-clockwise until the red LED is lit and a
constant audio tune is heard. Turn the sensitivity adjuster clockwise
until the red LED just goes out and the tone fades (green LED on).
The detector is now tuned for optimum sensitivity and depth range.
3.Holding the unit with the detection face towards the surface, sweep
backwards and forwards continuously at a height of 10-30mm
above the area to be scanned.
4.The presence of metal will be indicated by the audio warning tone
and the red light coming on. If the detector is held still over a metal
object the detection signal will automatically reduce, therefore it is
important that the unit is continually scanning the surface when in
use.
PERFORMANCE
The sensitivity of the detector is determined primarily by the
size, shape and composition of the object to be detected.
Typical performance figures are given below:
Maximum Detection Range
Object Low Sensitivity Optimum Sensitivity
38 Caliber hand gun 15cm 20cm
Pen knife 10cm15cm
Razor Blade 5cm 10cm
LOW SENSITIVITY OPERATION
Press the low sensitivity switch during detection, scanner will then
only respond to bigger metal objects such as a hand gun, knife, etc and
will not respond to small metals such as a coin, key, hatpin, etc. Do
not release the low sensitivity switch until you complete low
sensitivity detection.
RECHARGEABLE BATTERY SOCKET
You may use a 9V rechargeable battery to power the detector.
It takes four to six hours to fully charge the battery. The battery
charger socket is located at the side of the detector .
Note: Turn off the detector when charging it.
EARPHONE
Can connect earphone to use in the noisy environment
SIGNAL LED LIGHT
The more LED shine means the metal bigger
VIBRATOR BUTTON
The detector is equipped with a vibrator button also located at the side
of the detector. Vibration function should be used in noisy work
situations or in places where the operator does not wish for the audio
tune to be heard in his surrounding area. Press this button, vibrator
works; release it, audio tune works.
NOTE
If the green light goes out completely or fails to come on or if the
unit is making unfamiliar audio tunes, the unit is unstable and
should not be used until the battery is recharged or replaced.
If the unit is not to be used for a certain length of time it is
advisable to remove the battery to avoid battery leakage with could
cause serious damage to the detector
When not in use, the detector should be stored in a dry warm
environment.
SPECIFICATION
Power Voltage:9V Standard or Rechargeable Battery
Power:270mW
Operating Frequency:22KHZ
Operating Current:<50mA
Operating Voltage:7V -9V
Operating Temperature:-5 ºC to +55 ºC
Net Weight:409g
Dimensions:41(L)X8.5(W)X4.5(H)cm
Application
airport, government office, courts, prisons, schools, stadiums, place of entertainment and other applications.It can search all concealed weapons, tools and hidden metal objects, and can also be used for inspect the hand baggage, mail and parcel.

Shenzhen Xinyuantong Electronics Co., Ltd.

Shenzhen Xinyuantong Electronics Co., Ltd.was established in 2000 with the registered capital of RMB 31.5 million, the total business space is 12,000 m2, there are more than 260 employees, including 120 research, engineering and technical personnel; we are one professional high-tech company which provide the solutions to the public safety, and provide the complete production and integration services.

The Company is committed to the technical development and research of "GuardSpirit" series of security products, the developed products have been granted by 28 national patents, and have formed five categories of products including the metal detectors, X-ray baggage scanners, test products for radioactive materials, vehicle chassis inspection products, EOD and anti-explosion products.

Our Company has been committed in the business of access security, security equipments and services for 14 years, and during the period, we have provided safety and security services for hundreds of large-scale events, meetings, exhibitions, political and legal departments, railways, highways, ports and other places, including 26th Summer Universiade Shenzhen 2011, World Expo 2010 Shanghai, 16th Asian Games Guangzhou 2010, 14th FINA World Championship -Shanghai 2011, 24th Winter Universiade Harbin 2009, Olympic Games Beijing 2008, Wuhan-Guangzhou high-speed railway, Beijing-Shanghai high-speed railway and other key events and projects.
One year warranty
You can contact us if there is any problem with our product.We will resolve
the problem without any delay.
Continuable service
You can contact us via E-mail,Skype,telephone,cellphone,Wechat,QQ and so
on.We can receive your request anywhere and anytime.
Certification
Necessary certifications are available.Our products have passed authorization
test,they are high quality and safe.
Please contact me if you are interested in any product,I can send more information to you.
Welcome to add me on Skype,I am on Skype all the time.

Shenzhen Xinyuantong Electronics Co.,LTD
ADD: Building 3, Xiaxue Industrial Park, Bantian Street, Longgang District, Shenzhen, China
X-ray Baggage Scanner//Walk Through metal Detector //Hand Held metal Detector//Under Vehicle Inspection System