China HHose Crimping Machine

Hand Hose crimping machine KM-92S-A techincal data:

Crimp range14mm-37mmFor hydraulic hose1inch Max opening without dies57mmOpening 17mmForce1040KNCycle time---Voltage & PowerBY HAND,NO MOTOROptional voltageBY HAND,NO MOTORPumpENERPACDies sets7System pressure35MpaMachine size305*370*270mmWeight without oil26.5kgShelf+quick changeNOElectric limit switchNOElectric control with touch screenNO
KM-92S-A dies information:

Die information of KM-92S-AHose I.D.Die boreDie length Ferrule length1/4"(6mm)14mm64mmless than 64mm5/16"(8mm)16mm64mmless than 64mm3/8"(10mm)19mm64mmless than 64mm1/2"(13mm)23mm64mmless than 64mm5/8"(16mm)27mm64mmless than 64mm3/4"(19mm)31mm64mmless than 64mm1"(25mm)35mm64mmless than 64mm
Note: Die bore&Length can customized as your hydraulic fitting & ferrule size.


KM-92S-A applition:
1. Suitable for OUT DOOR MAINTAINCE, onLY 26.5KG, EASY TO CARRY.
2.Used rubber hose to transmit hydraulic pressure as there working power.
3. used in Building Construction, Petroleum Industry, Chemical Industry, Car and Motor Industry.

1. kangmai hose crimping machine CE& ISO PATENT Approved and SGS Audited.

2. The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason like below:
(a)The machine head process by CNC machine,roundness and taper is within 0.1mm.
(b)The machine die base and dies adopt special die steel and process by advanced craft, the hardness is above 55 HRC. The die hardness is enough so that the die life is very long and easy to crimping high pressure hydraulic hose, 4SP even 6SP.
(c) The technical of machine head is forging or casting. Casting is cheap but has small hole on machine head. The piston will divide from casting machine head.

3. Strictly testing and inspetion.
(A) for raw material, we will check again by our inspector as per international standard. only the raw material reach to international standard and allow enter kangmai facotry.
(B) for hydraulic and eletrical parts, such as valve, pump, motor and so on, we use famous brand both from China and abroad.However, we will check again when these parts enter our facotry.
(C) before the hose crimping machine enter our warehouse, the inspector check the machine roundess, taper, opening, speed, noise, apprance and so on. only each parts is up to standard of ISO, CE standard, the machine can enter the warehouse.
(D) when the machine package, the inspector the dies, the package and other parts of clients requriment. Everything is ok, the inspector signed and machine allow to go out the facotry.

4.KANGMAI HYDRAULIC Pay attention to package so that the machine can reach to client safely:

5. KANGMAI HYDRAULIC PAYTATION SERVICE AND TECHINCAL SUPPORT:
(A) tell you, my dear clients- the route of vessal.
(B) take the photo of machine production condition and package condition to you-my clients.
(C) Apply free container yard of your port, my dear client give you engouh time to clear your country customer.
(D) when you get our hose crimping machine, I will tell you again how to operation the machine and how to maintaince the hose crimping machine.
(E) pay a return visit after you use our machine 2-3 hours. Offer some suggestion again about maintaince machine so that you can use kangmai machine for a long time.
(F) technical support: (1)24 hour technical support available
(2)We can ask our engineer to your mentioned address if
there is any need.
we are on fair: