China Haisun Mining Grly Vertical Disk Filter

GPYL series vertical disk filter is a solid-liquid separation equipment and filter by the motor through reducer and open gear to drive is to rotate at a certain speed in the tank full of pulp, in the adsorption zone with vacuum pump in filter media on both sides of the formation of pressure difference, the solid adsorption material in the filtering medium (filter cloth), cake formation, when the disc filter of this part from the pulp out of and into the dehydration zone, filter cake in the vacuum pump suction under, water will continue to with the cake separation, discharged by the filtrate pipe and allotment, cake so dry. Cake into the dry zone and remove most of the water, and then enter the blown area, compressed air generated by a blower, blown filter disc on the most of the cake and the rest by the scraper unloading, a complete cycle ends.
Technical characteristics:
1, no stirring device for easy filter materials (such as aluminum hydroxide scab material), can be achieved without stirring and filtering.
2, the filtrate flow back less, due to the use of small filter plates, large and medium hollow structure, filtrate less reflux, filter cake with a low amount of liquid.
3, the filtrate of the floating material is low, the filter plate hollow shaft seal, leak less.
4, with overload protection, even if the filter board used to be stuck, it will not cause the accident.
5, the use of variable frequency speed regulation, can be reversing, speed can be adjusted freely; bearing shingles and vacuum sealing surface by electric fuel pump automatic lubrication, convenient and quick.
6, the center angle of the single piece of fan plate decreases, the diameter of the disk is greatly increased, the filter and the drying area are enlarged, and the area of the transition area is reduced.
7, filter plate structure to ensure the strength of the same time, greatly increase the opening rate to improve the filtration performance.
8, a single piece of filter plate size, reduce the weight of filter plate, convenient replacement of filter cloth.
9, the filter plate using a pressing device, the device to ensure that the filter plate and the hollow shaft connection does not leak.
10, the filter disc is provided with guide wheel device, filter plate guide device to prevent the filter disc excessive deflection, prolong the service life of the filter fabric.
11, instantaneous blowing system using no contact switch, so that the action is accurate, life extension.
12, the use of centralized grease lubrication system, so that more reliable lubrication, more stable operation of the equipment.