China Haisun Permanent Magnet Wet Style Selection Machine

In order to improve the efficiency of mineral processing, reduce the cost, improve the recovery rate of concentrate powder, mineral magnetic separator used the latest production technology and the latest research results of magnetic materials.
As a result of the computer simulation design, making separator tank is more suitable for the flow of magnetic materials, recycling and pulp, scattered. Through a new magnetic circuit design, in the slot scan selected region to produce a large magnetic field gradient and to obtain the magnetic particles greater adsorption capacity. Meanwhile, it also makes the energy concentrated in the medium flow layer, don't waste outside the tank, grasp the these factors are hungry magnetic separator to achieve better effect.
With the new magnetic circuit design, more and more magnetic poles are designed in the area, which can increase the stirring effect. The separation of magnetic and non magnetic materials is more rapid, and the recovery rate of concentrate powder is higher.
Characteristic:
1, according to the different stages of the ore selection characteristics were designed to select, coarse, selection and other magnetic separation machine.
2, the use of advanced magnetic circuit design, magnetic distribution uniformity, high permeability depth, high recovery rate, select the use of multi pole structure, it is beneficial to improve the grade of concentrate.
3, the tank structure is reasonable, beneficial to pulp through, to prevent clogging, and are arranged at the two ends of silt discharge mechanism, easy for maintenance and cleaning.
4, the transmission device is stable and reliable, the whole performance is good, can be a long time without fault operation
CTY series permanent magnetic wet pre press is a wet type magnetic separator designed for running tail of magnetic ore before grinding.
Technical characteristics:
1, feed box is provided with a homogenizing device to ensure the material entering the tank is uniform in the length direction of the drum.
2, the inner surface of the groove body and the outer surface of the magnetic roller are adhered with wear-resistant layer to increase the wear resistance and prolong the service life of the inner surface of the groove body.
3, the mineral particle size diameter of up to 16mm.
4, tailings magnetic content significantly reduced, compared with the ordinary magnetic separation equipment to reduce the magnetic content of the tail 1-3%.
5, magnetic bag angle of 138 degrees, the selection process longer, concentrate to improve the taste 2-4%.
6, the inside of the tank to maintain a certain high level, easy recovery of magnetic materials.