Standard configuration list:
1, a power meter red light machine Taiwan
2, a package of Oxford
3, AA two AA alkaline batteries
4, FC interface to a power meter
5, SC interface to a power meter
6, a red light in adapter FC
7, a description
8, a box
PM plus red light machine (using a circular laser spot), red multimeter, Combo Fiber Tester
A type (-70 to + 8 for telecommunications users), C-type (-50 to + 26 for radio and television users)
Product Features
- Users can self-calibration (without PC), but also to restore factory calibration values;
- Automatic shutdown function can be set;
- You can set the reference value, REF relative measurement;
- Real-time display battery charge;
- Steady red light output (constant power control circuit)
- The use of interchangeable optical port interfaces with FC, SC chief, more accurate measurement;
- Two AA batteries, low power design, long time;
- Rubber shell, increase protection performance, suitable for field work
product description
TL-560 series portable optical multimeter, also known as optical multimeter, a power meter, red light into one of the assembly,
both PM and red light can be used simultaneously, it can also be used alone.
Wherein the optical power module has 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm 6 wavelength calibration points. Can display
linear and nonlinear optical power, both for the direct measurement of optical power can also be used for relative measurement of
optical link loss.
650nm visible red laser light source module provides outputs for single-mode or multimode fiber measurements, they emit red light
emitted from the optical fiber can be bent more serious position and the cover layer breakpoint or bare fiber, or you can connect
from bad injection of joints, therefore, to identify light jumper, patch panels, patch panels, joints failure.
The instrument has a rugged, small size, light weight, portable and low power consumption, large LCD display makes measurements
easier and faster. Cable television systems, optical fiber communications and other fields of construction and maintenance of
essential equipment.
Power measurement range dBm Type A: -70 ~ + 10 Type C: -50 ~ + 26
Wavelength measurement range nm: 800 ~ 1700
Calibration Wavelength nm: 850,1300,1310,1490,1550,1625
Probe type: InGaAs
Accuracy: <± 3% (-10dBm, 22)
Display Resolution dB
Linear Display: 0.1%, and the number of display: 0.01dBm
Working temperature: -10 ~ + 50
Storage temperature: -20 ~ + 70
Relative Humidity: 90% (+ 30), non-condensing
Optical interface: FC, SC (ST LC optional)
Power supply: two AA batteries on the 5th
Battery continuous operation time h: 120 hours (power light work only)
Auto power off time min: 10
Weight g: 180
Dimensions mm: 158 x 82 x 29
Red light (optional feature)
Wavelength 650nm, power 1-5MW / 10/20/30 / 50mw optional output 0HZ, 2HZ
Features:
High sensitivity, large dynamic range
Common interface design: FC/SC/ST interface, the standard FC, SC, adapter interface
Miniature casing protection design, compact and easy, falling to prevent accidental damage to the instrument detector.
Fast response without preheating
Low voltage display function
Optional automatic shutdown function
Optional automatic shutdown backlight function
New users since the calibration function Logarithmic power (dBm) and linear power (xW) measurement
Big screen and LED backlit display