China Hardfacing Rods Wear-Resistance Welding Rods Surfacing Welding Rods

-----------------------------------------------------Tungsten Carbide Composite Welding Rods ------------------------------------------------
Zhuzhou Reach Tungsten Carbide Composite welding rods for hardfacing it is made of by tungsten carbide granule and some matrix alloy ,there is coating welding rods and welding rods without coating . The composition of tungsten carbide granules is mainly WC and Co,The hardness is about HRA89-91.matrix body alloy is mainly Copper and Nickel alloy ,strength can up to 690MPa,Hardness HB≥160.Grade :YG8
Size : W14-16 * L450mm / L350mm and we can make according to your enquiry
Brand: ZZRC
Material : tungsten carbide granule + matrix alloy
Certificate: ISO9001:2008
AdvanInstrument Box tage: Stock / Fasxt delivery / long life working / great wear-resistance
--------------------------------------------------Tungsten Carbide Composite welding rods for hardfacing usage--------------------------------
It is mainly used for surfacing welding the oil,mining ,coal mining ,geology,construction and other industries in some serious wear and tear or artifacts of both cutting and milling shoes ,grinding ,centralizer ,reamer,drill pipe joints ,hydraulic cutter,scraper,plough planer knives,core bit ,piling drill,twist drill,etc.
overlaying process oftungsten carbide composite rod for hardfacingThe oxyacetylene butt, the operating process is as follows:(1) clean up the workpiece, make the welding workpieces surface with metallic luster.(2) the flat position of welding, therefore can use the appropriate clamping fixture for control of surfacing layer thickness, thick piece of available.(3) with a neutral flame preheating, flame core not contact surface, the distance to 25 mm is advisable.(4) carbide surfacing welding layer.With YD type electrode surfacing, the use of neutral flame (can be slightly carbonizing flame) tip is steady on the workpiece surface movement, the flaSurveillance, Control & Protection me of the alloy electrode heating (be careful not to make flame cone tip contact alloy particles), tire body in the electrode alloy melt, carbide particles are also falling.Before the tire body of moltenCapacitor metal solidification, the particles arrange, can use left hand of the alloy electrode fingers, or another person holding a base electrode or pull rod on graphite rod in a quick stir particles, making them evenlShopping Bags y aligned neatly.Surfacing layer thickness control according to the requirements of design.(5) after the workpiece welding, where no ventilation, slow cooling, cannot quench, conditional usable asbestos blanket cover.(6) the workpiece after cooling to roEngraving Machine om temperature, if necessary, grinding surface surfacing to required size and shape.(7) clean up the workpiece, remove all