China Heated Bed Hot Bed 3D Printer

PCB Heat Bed MK2B RED,Support 12V 24V Dual Power, Fully Assembled LEDs,SMT Thermistors, Resistor)
214x214mm 12V/24V Dual Power MK2B PCB Heated Bed Hot Bed For Prusa 3D Printer

Features
Brand new and high qualityLinear Actuator
Dimensions (Outer): 214mm x 214mm
Dimensions (Heat Bed): 200mm x 200mm
Laminate FR4 1.6±0.15mm
2 Layer, 35μm Copper
Power Input: 12V/24V DC
Copper Plated Holes
Come withElectrical Control System resistor and LEDs soldered,basic soldering skills needed to solder the power wire
This heatbed is designed to be compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed. This heatbed has a dual power capability allowing it to be used with 12V or 24V power supply sources. It features a central mounting hole on the front side to allow for three point mounting. This is much easier for bed levelling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole. A glass plate is highly recommended to provide a truly flat surface and rigidity.Additionally, the solder pads have been greatly increased in size,making it much easier and allowing for the use of 1206 surface mount components.But this does not remove the need to use proper strain relief.Please note: ABS filament is not recommended.

NOTE:

Test report:

Pick up the 12 v

As the temperature rises, the current drops to 8.8A (physical knowledge: resistance increases as the temperature rises)

24 v

The maximum theoretical current is less than 5A.

Package included:1x MK2B Heatbed in Red
Our advantages:
Factory
OEM supported
Short time delivery
Flexible payment
Aftersale service guarantee
Hardware&software technicians supported
Factory: there are over 200 colleagues in our Longhua factory
Sales&warehouse team: there are over 50 colleagues, locating in Chegongmiao where ensure the fatest dilevery.
Certificates FAQQ1. What is your terms of packing?
A: Generally, we Drilling Tools pack our goods in neutral white boxes and brown cartonsCommodity Making Machine . If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.Q2. What is your terms of payment?
A: Full payment. Goods would be shipped in 3-5 work days after payment received, finally depends on quantities.Q3. What is your terms of delivery?
A: EXW.Q4. How about your delivery time?
A: Generally, goods would be shipped in 3-5 work days after payment received, finally depends on order quantities.Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the Hydraulic Press sample cost and the courier cost.Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before deliveryFeel free to contact me if you have any question.