China Hfp52 Line Feeding for Enclosed Conductor Rail

General
Soler Enclosed conductor rail system is a conductor, protected from contact (IP23),for indoor and outdoor plants. They are conductor lines in a rigid green PVC housingwith different copper cross sections for rated currents of 50-140A.
The current collectors, running in ball bearings, are guided by the housing.
The main is transferred by spring-stored carbon brushes.
Type HFP-P:not include Sealing strip, with factory-mounted flat copper band and bolted-operated plug connectors.
Type HFP-R:Curves for R≥800mm,with factory-mounted flat copper band and screw connectors.
Approved and listed by: CCC,ISO9001 and CE.

TypeWeight(kg)52LF/500-4/80A1.7752LF/500-4/140A2.0252LF/500-7/80A3.0552LF/500-7/140A3.50

System photo

Technical data

Electrical properties:

Mechanical properties:

Max.current:240A

Flexible strength: 75N/mm2±10%

Max.voltage:690V

Tensile strength: 75N/mm2±10%

Dielectric strength:30-40KV/mm

Temperature range:

Spec.resistance:5x1015Ohmxcm

Standard Housing:-20°C up to +70°C

Surface resistivity:1013 Ohmxcm

High Temp.Housing: -10°C up to +115°C

Leakage resistance:CT1600-2.7

Low Temp.Housing: -40°C up to +80°C

Combustibility:

Flame retardant: Class B1-no flaming particles,self-extinguishing

Self extinguishing: Class B1-no flaming particles,self-extinguishing

Resistance to chemicals:+45°C

Gasoline Sulphuric acid 50%

Mineral OilCaustic soda 25%&50%

GreaseHydro-chloric acid, concentrated

Connection:

Through plastic joint caps

Feed Sets:

Line feeds or end feeds

End caps:

The open ends of the powerail are closed by end caps for HFP52.

Hangers:

Standard brackets for powerail attachment to crane girders are available .

Powerail with sliding and fixpoint hangers.

Standard distance between suspension points for indoor and outdoor.

Installations:1200mm.

Expansion during temperature fluctuation

The Expansion sections are required to compensate the different expansions between copper conductors and steel or concrete structures, in varying temperatures without interrupting electrical power.

Anti-condensation sections

These sections are used for transfer of the Powerail to outdoor areas to avoid condensation. The Powerail is not separated electrically.

Sectioning

Available as air gap version(5mm),where the collector carbon bridges the gap, e.g. for mains. Also available as insulating piece version(35mm). In this case the insulating piece is longer than the carbon and each Powerail section can be separated electrically, e.g. for control.

Current collectors:

The current collectors are made of re-inforced polyester fiberglass, for high strength and light weight. Spring loaded carbon brushes maintain uniform contact. Connecting cables and hinged or flexible towing arms included. Double collectors for transfer applications and higher amperage.