China High Efficient Gravity Separation Vibrating Shaker Table for Mining Recovery

Introduction
Shaking table, as one of the gravity mining machines, applicable to nonferrous metals, ferrous metals and rare metals mineral, like gold, tungsten, tin, tantalum, iron, manganese, chrome, titanium, bismuth and lead, which the size ranges from 2-0.037mm, also recovery of Au, Cu, Ag from various of slags, PCB, waste wire and cable, battery scrap, to improve recovery ratio and protect environment.
Recovery material size ranges are: coarse sand (0.5 mm to 2 mm), fine sand (0.074 mm to 0.5 mm) and slime (-0.074 mm). Effective mineral recovery size range is 0.22 mm to 2 mm.
Structure of mineral processing machinery shaker table Wilfley table consists of transmission, electronic motor or by diesel, slope adjuster, bed, ore groove, water groove and lubricating system
1. Transmission
The transmission is of rugged construction and requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil pump.
2. Decks
The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom and are easy to clean, not have common maintenance. The fiberglass decks have characteristic of water-resistance and corrosion-resistance.
3. Feed box and water box
A wooden feeding box with hooper and long water box are attached to the iron of deck, to make feeding evenly.
1. Ore Feeding Mouth 2. Stroke Adjusting Device3. Ore Feeding Chute4. Water Feeding Mouth5. Water Feeding Chute6. Table Surface7. Concentrates Discharging Area8. Tailing Discharging Area9. Horizontal Support10. Horizontal Adjustment Wheel11. Table Support12. Knife-Type Support13. Stand14. Driving Unit15. Motor Support16. Swing Adjusting Device
Working Principle
The working principle of zircon sand shaker table is to use the combined action of the specific gravity for different sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch groove), to allow loose layering of ores on the bed surface and fan-shaped zoning.
Application
shaking table is one of the main equipment for gravity classification, which is widely applied in the classification of tungsten, tin, tantalum, columbium and other rare metal and precious metal ore. gold table is designed for wet gravoty-base separatiom of minerla and other granular materials. It is effective in processing precious and base metal, rare and non-metallic minerals.
Advantages and Characteristics
1 Ingenious structure of inertial gearing, self balanced vertical force component. No vertical jump because no vertical vibrating force. It can be installed on the building floor, or on the bracket
2 Lift type, minimal consumption of friction, reduce vibration and energy-saving, non-required bulky base, quick and flexible installation
3 It adopts fiberglass deck with wear-resistant layer, wear-resistant, waterproof, anti-dry, anticorrosion, non-deformed, less maintenance, long service life
4 The deck installed in an uniform frame Layer-by-layer, easy to install and unload, increase processing capacity per unit area. Replace different weight blocks can change the stroke of shaking bed
5 It adopts variable-frequence governor, easily change frequency of stroke to adapt different material with different particle size and feature
Technical Parameters

Model PerformanceLS4500LY3000LY2100LY1100Screen Size(mm)4500x1850x15603000x1620x11002100x1050x8501100x500x430Stroke length mm10-306-3012-289-17Frequency tpm240-420210-320250-450280-460Horizontal slope °0-50-100-80-10Feeding Range mm2-0.0372-0.0372-0.0372-0.037Feeding Density %10-3010-3010-3010-30Capacity(t/h)0.3-2.50.2-1.50.1-0.80.03-0.2Water consumption0.4-0.70.3-1.50.2-10.1-0.5Motor power kw1.11.11.10.55Size(mm) l*w*h5600x1850x8604075x1320x7803040x1050x10201530x500x800

Remark:
The shaking table have three distinct deck designs available.
The coarse ore deck is designed for recovering particles size from 0.5mm to 2mm
The fine sand deck is designed for recovering fine particles size from 0.074mm to 0.5mm
The slime deck is designed for recovering super extremely fine particles from 0.15mm to 0.074mm
Packaging
1.LY1100 & LY2100 with wooden box
2.LY3000 & LY4500 with iron frame
Detailed Images

Company Information

is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.
is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Package: FCL & LCL export standard container 20GP/40GP/40HQ.
FCL: main machinery gold shaking table in nude package and bulk in container, spare parts in wooden box or as your special requirement
LCL: machinery are packed in steel frame, base and deck are separately packed.
Shipping: by sea shipment, by air shipment or by courier express, it depends on you.
Payment Terms: T/T or L/C is preferable. T/T: 30% deposit and the balance before delivery
We will take photos for your products when finished and show you before delivery. Also keep you informed for any updated information including shipping before you receive it, to let you rest assured.
Delivery time: shipped in 15 days after payment
FAQ
1.How is the quality of your products? (mining equipment/machine)
Answer: Our products are manufactured strictly according to national and international standard, and we will take a test on every grinder before delivery.
2.Guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description as we
described or the promise before you place order, we promise 100% refund.
3.How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.
4.Service and Payment Terms?
Answer: We can accept T/T and L/C; 30% deposit, 70% balance before delivery, which is international trade practice;Finished product pictures will provide to customers before delivery.
Our Service
1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.
2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export
3) After-sales service: Offer considerate technical guidance in installation, debugging and operators training. We are available at any time if you need.
Contact
JiangXi Victor International Mining Equipment Co.,Ltd
Tel/Fax: 86-797-5712751
Mob: +86 133 6177 9811
Add:Guzhang industrial park,Shicheng county,Ganzhou city,Jiangxi Province,342700,China